Re: [microblaze-uclinux] UART and IRQ

[Aurelian Lazarut <aurelian.lazarut@xxxxxxxxxxx>]

Roberto,

Did you check if the baud rate is generated correctly?
oscillator frequency on the ml300, the baud rate in the uart_lite in
your MHS file, DCM settings etc.
is looking like baud rate problem to me.

Aurash 

On Fri, 2004-02-06 at 07:41, Roberto Farina wrote:
> We're currently using the EDK 6.1, but the data caching is enabled.
> We'll try to disable it and let u know the results.
> 
> With only the serial peripherals instantiated "<kc" is theonly string that 
> appears on the console; adding the EMAC interface, lots of symbols (without 
> any meaning) appear next....
> 
> --------------------------------------------------------
> Roberto Farina
> CEFRIEL - Embedded Systems Design Unit
> Via Fucini, 2 - 20133 MILANO (ITALY)
> Phone:  +39 02 23954 236
> Fax:    +39 02 23954 254
>         178 606 5693
> E-mail: roberto.farina@cefriel.it
> -------------------------------------------------------- 
> 
> ___________________________
> microblaze-uclinux mailing list
> microblaze-uclinux@itee.uq.edu.au
> Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
> Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/
> 

___________________________
microblaze-uclinux mailing list
microblaze-uclinux@itee.uq.edu.au
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/