[microblaze-uclinux] mbvanilla_net under ISE/EDK6.2

[John Williams <jwilliams@xxxxxxxxxxxxxx>]

Hi folks,

Has anyone tried building mbvanilla_net under ISE/EDK6.2?  I ran the 
revup utility first, which basically only touched the .mss file.

I'm building this purely under Linux BTW, haven't tried yet upgrading my 
winXP setup.  I have the latest and greatest service packs etc.

The results are very, very odd.  The HW platform and bootloader 
synthesise and upload fine, and I get the bootloader menu printing 
correctly, however when I try to enter a number (like 1 to boot from 
flash), the character received by the UARTlite is actually a '5'.  It's 
hard to explain - I type 1 on my keyboard (using minicom as I always 
have), but the character received and echoed by the bootloader is a '5'!

Any ideas?

John
___________________________
microblaze-uclinux mailing list
microblaze-uclinux@itee.uq.edu.au
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/