Hi John, I have the design working on EDK6.2 SP1. I haven't had any problems.. I am attaching my EDK design file (same as mbvanilla_net, but DCMs have been changed).. I use Windows Hyperterminal for communication. - Raj John Williams wrote: > Hi folks, > > Has anyone tried building mbvanilla_net under ISE/EDK6.2? I ran the > revup utility first, which basically only touched the .mss file. > > I'm building this purely under Linux BTW, haven't tried yet upgrading my > winXP setup. I have the latest and greatest service packs etc. > > The results are very, very odd. The HW platform and bootloader > synthesise and upload fine, and I get the bootloader menu printing > correctly, however when I try to enter a number (like 1 to boot from > flash), the character received by the UARTlite is actually a '5'. It's > hard to explain - I type 1 on my keyboard (using minicom as I always > have), but the character received and echoed by the bootloader is a '5'! > > Any ideas? > > John > ___________________________ > microblaze-uclinux mailing list > microblaze-uclinux@itee.uq.edu.au > Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux > Mailing List Archive : > http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/ > -- -- Raj _ / /\/ Raj Nagarajan (raj.nagarajan@xilinx.com) \ \ Xilinx / / 2100 Logic Drive \_\/\ San Jose, CA 95124 USA
Attachment:
mbvanilla_net.tar.gz
Description: GNU Zip compressed data