Re: [microblaze-uclinux] different uclinux ports on microblaze

[Yasushi SHOJI <yashi@xxxxxxxxxxxxxxxxx>]

At Mon, 10 May 2004 07:51:38 +1000,
John Williams wrote:
[...]
> > Specifically, platform used (Eval, Devel Kit bought from, your own 
> > hardware). If it is a "standard" hardware, just the order/model number 
> > is fine. If you did something in house, please a short description
> > of the platform, if possible.
> 
> I can kick it off with mbvanilla_ddr and mbvanilla_net :-)
> 
> mbvanilla_ddr:
> First useful Microblaze uClinux platform - targets Insight v2mb1000 
> board.  Uses microblaze core, gpio, timer, intc, memcon, ddr_controller, 
> 2 x uartlite
> 
> mbvanilla_net:
> Network-enabled version of mbvanilla_ddr - same as that platform except 
> added the Xilinx EMAC core

suzaku:

tiny(72x47mm) board with Spatan 3 and SMsC 91C113. Also has TE7720 for
configuration.

Shipped with MicroBlaze core, gpio, timer, intc, memcon, 1 x uartlite.

SDRAM: 16MB
Flash: 4MB

[...]
> > I would collect all the data, and forward a summary to John,
> > probably he can find a small corner on the uclinux-mblaze page
> > to put this up ;-)
> 
> There is more than just a small corner available for such a resource!

John's wiki site is good place to start, IMO.
--
        yashi
___________________________
microblaze-uclinux mailing list
microblaze-uclinux@itee.uq.edu.au
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/