[microblaze-uclinux] Porting help

[Richard Klosinski <rklosinski@xxxxxxxxxxxxx>]

Im trying to port a mbvanilla design to Spartan 3. I have done the following:

1)Remove all the hardware in the mbvanilla Xilinx design that is not on my target. This included flash and emac.

2)Rebuild uclinux, and got it to work.

3)Took the working Xilinx design, changed out the memory component to match the type of memory I will be using (4Mx16 sram).

4)Tested the sram and platform to verify it works.

5)Modified and rebuilt uclinux, change memory size in the .ld file, CONFIG_CPU_CLOCK to 50000000.

6)Tried new platform, and got this on my terminal screen.

 Coooo    ssssaaaannnnRRRRtttttttnccccaa aallll:::::::itttt    aaaaoooo.......

7)Remove the hardware divide, and barrel shifter from the Xilinx and uclinux design.

8)Tried again, with the same results.

HELP.

Does this garbage look familiar to anyone?

Richard


___________________________
microblaze-uclinux mailing list
microblaze-uclinux@itee.uq.edu.au
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/