RE: [microblaze-uclinux] Porting help

["Richard Klosinski" <rklosinski@xxxxxxxxxxxxx>]

Thanks
RIch

-----Original Message-----
From: owner-microblaze-uclinux@itee.uq.edu.au
[mailto:owner-microblaze-uclinux@itee.uq.edu.au] On Behalf Of Yasushi SHOJI
Sent: Thursday, October 07, 2004 1:09 PM
To: microblaze-uclinux@itee.uq.edu.au
Subject: Re: [microblaze-uclinux] Porting help

At Thu, 7 Oct 2004 09:48:02 -0700,
Richard Klosinski wrote:
[...]
> A) printk and console does not work. I tested each by adding a call to the
> sendbyte routines somewhere at the beginning of main.c, and I got stuff on
> my terminal screen. 

btw, you might want to try early printk patch that I posted a while
ago.  printk() will work after bss initialization; not like regular
printk() which will be enabled after console activation.  early printk
use simple polling instead of interrupts, so it might help you
debugging your hardware.

best,
--
            yashi
___________________________
microblaze-uclinux mailing list
microblaze-uclinux@itee.uq.edu.au
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive :
http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/



___________________________
microblaze-uclinux mailing list
microblaze-uclinux@itee.uq.edu.au
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/