[microblaze-uclinux] pcmcia and 802.11 cards

["Richard Klosinski" <rklosinski@xxxxxxxxxxxxx>]

I'd like to start designing a pcmcia interface for my microblaze/ucLinux
system, and would like to know if anyone has had experience making this
connection. I have a few questions:

1) I noticed that most pcmcia card side chipsets do now use address lines
a11:24. Can someone confirm this?

2) Obviously, the microblaze is 32 bits, so I plan to steer the 16bit data
to the upper/lower words depending on the lsb (a31 in the microblaze world).
Does this sound like it would work?

Anyone have words of en/dis-couragement before I start...

Thanks
Rich.

PS. If anyone is interested in the port to the nuhorizon sp3 demo board, I
can tar the new files with instructions on how to re-assemble them. Sorry,
Im not to savvy in the linux world of patches. The card is now 100%
functional (sdram, flash, 2 comm ports, and led to blink a heartbeat).


___________________________
microblaze-uclinux mailing list
microblaze-uclinux@itee.uq.edu.au
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/