Re: [microblaze-uclinux] uclinux port to Multimedia board

[didier delacretaz <didier_delacretaz@xxxxxxxx>]

Hi,

aurash wrote:
> Didier,
> see below,
> 
> didier delacretaz wrote:
> 
>> Hi,
>>
>> John Williams wrote:
>>
>>> Hi Didier,
>>>
>>> didier delacretaz wrote:
>>>
>>>> the value of the variable ticks in linux-2.4.x/init/main.c is 
>>>> allways the same (0), i think that the problem comes from the timer, 
>>>> but i can't find it. I checked the xparameters.h file and everything 
>>>> seems right. The CPU_CLK_FREQ is set with the correct value.
>>>
>>>
>>>
>>>
>>> It seems like the timer interrupt is simply not running.  Confirm you 
>>> have your timer peripheral connected to IRQ 0 (or have adjusted the 
>>> setup code appropriately if that's not the case).
>>>
>> the interruption port of the mhs file:
>> PORT Intr = ethernet_interrupt & debug_uart_interrupt & 
>> console_uart_interrupt & timer_interrput
> 
> 
> This looks like a misspelling to me "timer_interrput" can you check if 
> you have the same name at the timer side
> 
> Aurash
> 
I made this misspelling only on the e-mail i sent, everything is fine in 
my mhs file

Thanks,
Didier

___________________________
microblaze-uclinux mailing list
microblaze-uclinux@itee.uq.edu.au
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/