Re: [microblaze-uclinux] new member

[John Williams <jwilliams@xxxxxxxxxxxxxx>]

Hi Fransisco,

Francisco Javie Tamayo Chacon wrote:

>>This Kit contains a starter board:
>>•       Complete solution, including:
>>o       Xilinx Spartan-3 200,000 gate Platform FPGA XC3S200-4FT256C (ES)
>>o       Xilinx 2Mbit Platform Flash Configuration PROM - XCF02S
>>o       1M-byte of Fast Asynchronous SRAM (512Kx16 or 256Kx32)
>>o       3-bit, 8-color VGA display port
>>o       9-pin RS-232 Serial Port
>>o       PS/2-style mouse/keyboard port
>>o       Four-character, seven-segment LED display
>>o       Eight slide switches
>>o       Eight individual LED outputs
>>o       Four momentary-contact push button switches
>>o       50 MHz crystal clock oscillator
>>o       Three 40-pin expansion connection ports
>>
>>First I want to know if the board can be loaded with The MicroBlaze™ 32-bit
> 
> soft
> 
>>processor core,  And if so ; what kind of applications can be done  with it.

You could get a simple microblaze system in there, but I don't think you 
could get Microblaze-uClinux going on it.

The S3-200 is probably a bit small for the extra supporting peripherals 
required (timers, uarts, interrupt controllers etC), plus the board 
doesn't have enough on-board memory (you want at least 2MB, preferably 4 
or more).

Regards,

John
___________________________
microblaze-uclinux mailing list
microblaze-uclinux@itee.uq.edu.au
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/