Re: [microblaze-uclinux] Questions on auto-config build flow

[John Williams <jwilliams@xxxxxxxxxxxxxx>]

Hi David,

David Banas wrote:
> Here you go.

The system you sent is quite some way from being uClinux-capable - in 
particular you need an interrupt controller, to which you must connect 
the interrupt outputs from an opb_timer peripheral (the FIT fixed 
interval timer is not supported yet), and also the interrupt signals 
from any uartlite peripherals that you want to use within uClinux.

Also, the signal names on the EMC memory controller suggest that you are 
connecting only to some external flash memory, is that correct?

The uclinux-auto project on my website is a good template for building a 
uclinux-ready microblaze system, I think you'll have more luck if you 
use that as a starting point or guide.

Regards,

John
___________________________
microblaze-uclinux mailing list
microblaze-uclinux@itee.uq.edu.au
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/