Re: [microblaze-uclinux] error updating bitstream (porting uClinux_auto to Xilinx ML401)

["Taeweon Suh" <suhtw@xxxxxxxxxxxxxx>]

Hi all,

I looked up auto-config.in file. It looks like it has all parameter
definitions according to hardware specifications in parameter tab of
Add/Edit hardware platform specifications.

For the latest DDR, since the patch doesn't work for now, would it work if
I manualy add all parameter list with DDR version 1.10a in auto-config.in
file?
Thanks,

Taeweon

> Hi Taewon,
>
> Taeweon Suh wrote:
>
>> My platform does not have an interrupt controller
>
> OK, so that will be the cause of the problem.  The TCL scripts assume
> that there is an interrupt controller, and probably don't even do any
> error checking in case there is not.  Another thing to add to the
> wishlist.
>
> (I just made it simple
>> to see if auto_config.in file is generated correctly, I'll include INTC
>> later if it works fine)
>
> I think you'll have problems with the autoconfig until you add the
> interrupt controller.
>
> Regards,
>
> John
>
> ___________________________
> microblaze-uclinux mailing list
> microblaze-uclinux@itee.uq.edu.au
> Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
> Mailing List Archive :
> http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/
>
>


----------------------------------------------
Taeweon Suh

Ph.D. Candidate
School of Electrical and Computer Engineering
Georgia Institute of Technology
Atlanta, Georgia USA

Lab: CoC345
Tel: +1-404-385-6273
E-mail: suhtw@ece.gatech.edu
----------------------------------------------

___________________________
microblaze-uclinux mailing list
microblaze-uclinux@itee.uq.edu.au
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/