[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[microblaze-uclinux] IDE ATA-4, ATA-5 interface for microblaze?

To: <microblaze-uclinux@xxxxxxxxxxxxxx>
Subject: [microblaze-uclinux] IDE ATA-4, ATA-5 interface for microblaze?
From: "Roman Wojnar" <r.wojnar@xxxxxxxx>
Date: Tue, 3 May 2005 19:30:11 +0200
Importance: Normal
Reply-to: microblaze-uclinux@xxxxxxxxxxxxxx
Sender: owner-microblaze-uclinux@xxxxxxxxxxxxxx

Hi all,

I have intention to port IDE ATA-4 or ATA-5 interface to microblaze.
Have anybody any experience with IDE drivers for uClinux?
Are there any differences against Linux driver?

I have checked settings in "menuconfig" and there are missing support for
IDE-ATA interface. Why?

Can anybody help?

Roman Wojnar

___________________________
microblaze-uclinux mailing list
microblaze-uclinux@itee.uq.edu.au
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/

Follow-Ups:
- Re: [microblaze-uclinux] IDE ATA-4, ATA-5 interface for microblaze?
  - From: John Williams

Prev by Date: [microblaze-uclinux] Intended use of "/dev/flash/..." files?
Next by Date: Re: [microblaze-uclinux] Intended use of "/dev/flash/..." files?
Previous by thread: [microblaze-uclinux] Intended use of "/dev/flash/..." files?
Next by thread: Re: [microblaze-uclinux] IDE ATA-4, ATA-5 interface for microblaze?
Index(es):
- Date
- Thread