Bill,
I don’t think you’re crazy;
however, this project is driving me toward that destination. The problem that I
am having, is that I can find nowhere in the xemac or any other driver,
references to the following configuration parameters.
CONFIG_XILINX_ETHERNETLITE_0_INSTANCE
Intel_LXR971A_Tranceiver
CONFIG_XILINX_ETHERNETLITE_0_DUPLEX 1
CONFIG_XILINX_ETHERNETLITE_0_RX_PING_PONG 0
CONFIG_XILINX_ETHERNETLITE_0_TX_PING_PONG 0
CONFIG_XILINX_ETHERNETLITE_0_BASEADDR
0x00900000
CONFIG_XILINX_ETHERNETLITE_0_HIGHADDR
0x00903FFF
CONFIG_XILINX_ETHERNETLITE_0_OPB_AWIDTH 32
CONFIG_XILINX_ETHERNETLITE_0_OPB_DWIDTH 32
CONFIG_XILINX_ETHERNETLITE_0_OPB_CLK_PERIOD_PS
20000
CONFIG_XILINX_ETHERNETLITE_0_FAMILY spartan3
CONFIG_XILINX_ETHERNETLITE_0_INSTANCE
Intel_LXR971A_Tranceiver
CONFIG_XILINX_ETHERNETLITE_0_HW_VER 1.01.b
CONFIG_XILINX_ETHERNETLITE_0_IRQ 0
It appears that all references to
configuration parameters in the xemac files in /opt/uClinux-2.4.x/drivers/net/xilinx_enet
all reference configuration parameters that begin with “CONFIG_XILINX_ETHERNET_0…..”.
There does not appear to be a reference to “ETHERNETLITE” anywhere.
What am I missing?
Thanks, in advance, for your help.
Mike Wehrer
mwehrer@bellsouth.net
From: owner-microblaze-uclinux@itee.uq.edu.au [mailto:owner-microblaze-uclinux@itee.uq.edu.au] On Behalf Of wlovell
Sent: Wednesday, May 18, 2005 3:50
PM
To: microblaze-uclinux@itee.uq.edu.au
Subject: RE: [microblaze-uclinux]
Ethernetlite
Thank you, this will show that I am not crazy. Been telling
the programmer that.
William Lovell, Senior Design Engineer
PSoC & Xilinx Consultant
c-Link Systems, Inc.
212 Eddie Kahkonen Rd.
Norway, ME 04268-5312
P - 207-743-0002
wlovell@c-linksystems.com
www.c-linksystems.com
-----Original
Message-----
From: Sathyanarayanan Thammanur
[mailto:sathyanarayanan.thammanur@xilinx.com]
Sent: Wednesday, May 18, 2005
14:47 PM
To: microblaze-uclinux@itee.uq.edu.au
Subject: RE: [microblaze-uclinux]
Ethernetlite
Xilinx Ethernetlite core uses the emaclite
driver that ships with the Xilinx EDK installation
Sathya
From: owner-microblaze-uclinux@itee.uq.edu.au [mailto:owner-microblaze-uclinux@itee.uq.edu.au] On Behalf Of wlovell
Sent: Wednesday, May 18, 2005
10:58 AM
To: microblaze-uclinux@itee.uq.edu.au
Subject: [microblaze-uclinux]
Ethernetlite
My programmer has
inquired as to what driver the Xilinx EthernetLite uses. Any and all answers
would be appreciated.
William Lovell, Senior Design Engineer
PSoC & Xilinx Consultant
c-Link Systems, Inc.
212 Eddie Kahkonen Rd.
Norway, ME 04268-5312
P - 207-743-0002
wlovell@c-linksystems.com
www.c-linksystems.com