[microblaze-uclinux] Booting problem

["Willi@x Serr@xx" <ing.willi.serrato@xxxxxxxxx>]

Hi folks,

We are closer to complete the uClinux porting on our custom board (no
flash, just SDRAM, no Ethernet port) using serial port, but had the
next kernel boot log... please, could somebody help us with this??



Linux version 2.4.27-uc1 (root@cualquiera) (gcc version 2.95.3-4 Xilinx EDK 6.3
Build EDK_Gmm.12.2) #1 Fri Jun 10 09:49:59 COT 2005
On node 0 totalpages: 32768
zone(0): 32768 pages.
zone(1): 0 pages.
zone(2): 0 pages.
CPU: MICROBLAZE
Console: xmbserial on UARTLite
Kernel command line:
Calibrating delay loop... 2.36 BogoMIPS
Memory: 128MB = 128MB total
Memory: 128108KB available (625K code, 914K data, 36K init)
Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
Inode cache hash table entries: 8192 (order: 4, 65536 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 8192 (order: 3, 32768 bytes)
Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Microblaze UARTlite serial driver version 1.00
ttyS0 at 0x90000100 (irq = 2) is a Microblaze UARTlite
ttyS1 at 0x90000200 (irq = 1) is a Microblaze UARTlite
Starting kswapd
xgpio #0 at 0x90000400 mapped to 0x90000400
Xilinx GPIO registered
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
MBVanilla flash probe(0xff000000,8388608,4): 800000 at ff000000
CFI: Found no Flash device at location zero
Search for id:(00 00) interleave(2) type(2)
Search for id:(00 00) interleave(2) type(2)
Search for id:(00 00) interleave(2) type(2)
Search for id:(00 00) interleave(2) type(1)
Search for id:(00 00) interleave(2) type(1)
Search for id:(00 00) interleave(2) type(1)
Search for id:(00 00) interleave(4) type(2)
Search for id:(00 00) interleave(4) type(2)
Search for id:(00 00) interleave(4) type(2)
Search for id:(00 00) interleave(4) type(1)
Search for id:(00 00) interleave(4) type(1)
Search for id:(00 00) interleave(4) type(1)
JEDEC: Found no Flash device at location zero
MBVanilla ram probe(0x980ce860,733184,4): b3000 at 980ce860
Creating 1 MTD partitions on "RAM":
0x00000000-0x000b3000 : "Romfs"
VFS: Mounted root (romfs filesystem) readonly.
Freeing init memory: 36K
Warning: unable to open an initial console.
Kernel panic: No init found.  Try passing init= option to kernel.



Thx,
-- 
Willi@m

___________________________
microblaze-uclinux mailing list
microblaze-uclinux@itee.uq.edu.au
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/