RE: [microblaze-uclinux] XMD Crashing using NuHo reference design

["Raj Nagarajan" <raj.nagarajan@xxxxxxxxxx>]

Hi Jim,

Can you post the XMD output..

 -- Raj
 

> -----Original Message-----
> From: owner-microblaze-uclinux@itee.uq.edu.au 
> [mailto:owner-microblaze-uclinux@itee.uq.edu.au] On Behalf Of Jim Law
> Sent: Thursday, July 14, 2005 10:02 AM
> To: microblaze-uclinux@itee.uq.edu.au
> Subject: [microblaze-uclinux] XMD Crashing using NuHo reference design
> 
> Hi all,
> 
> Have:
> 
> NuHo S3-2000 board
> Parallel-IV cable
> ISE 7.1.03i installed in c:\xilinx7\
> EDK 7.1.02i installed in c:\edk7\
> ChipScope Pro 7.1.03i
> uClinux BSP V1.00a 16mar2005 - unzipped into 
> c:\edk_user_repository\ Dave Banas' 
> NuHo_S3-2000_uClinux_Rel2005062301.zip  - unzipped to e:\uClinux_try\
> 
> Followed the Quick Start instructions from Dave Banas:
> - copied the VHD files as described (noted that there is a 
> newer emc_common_v2_00_b\hdl\vhdl core in the directory - 
> ignored this)
> - launched XPS, opened the system.xmp, "download the 
> bitstream" built and downloaded fine
> - can see and talk to the bootloader from HyperTerm fine
> 
> Problem:
> - when I launch XMD, it crashes
> - I note that the connect command has some extra switches 
> after the "cpunr 1"  switch.  The full line is:
>  "connect mb mdm -cable type xilinx_parallel port LPT1 
> -debugdevice cpunr
> 1 -pfs1 port 0 type s"
> - after "Loading MHS File", it shows me the Adress Map twice, 
> and then gives a Windows report.
> 
> Tried changing the XMD options to Sim - runs ok (but not what 
> I need <g>) Changed the settings back - same results.
> 
> Thots? anyone?
> 
> Jim Law
> Iris Power Engineering
> 
> ___________________________
> microblaze-uclinux mailing list
> microblaze-uclinux@itee.uq.edu.au
> Project Home Page : 
> http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
> Mailing List Archive : 
> http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/
> 
> 
> 


___________________________
microblaze-uclinux mailing list
microblaze-uclinux@itee.uq.edu.au
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/