[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [microblaze-uclinux] Memec 3sMB1500 boot problems

David,

> David Banas wrote:
> What happens if you rebuild with MicroBlaze caching turned off?

uClinux boots!  I turned off caching by changing the following entries
in the MHS file:

PARAMETER C_USE_ICACHE = 0
PARAMETER C_USE_DCACHE = 0

This begs a further question as to why turning off caching on the
microblaze enabled uclinux to boot.  Is there some config on the uclinux
side that I could have tweaked to also allow uClinux to boot.

Thanks again,
Vincent 

> -----Original Message-----
> From: owner-microblaze-uclinux@itee.uq.edu.au 
> [mailto:owner-microblaze- uclinux@itee.uq.edu.au] On Behalf Of Carr, 
> Vincent
> Sent: Thursday, July 28, 2005 5:38 AM
> To: microblaze-uclinux@itee.uq.edu.au
> Subject: [microblaze-uclinux] Memec 3sMB1500 boot problems
>
>
> Hi Folks,
>
> I'm trying to boot uclinux on the Memec 3SMB1500 board.  I'm using the

> microblaze reference design as downloaded from the website and using 
> the auto-config mechanism to build uclinux.  I download the resultant 
> image.bin to RAM and attempt to continue.  However the uclinux 
> initialisation bombs out pretty early..
>
(snip)



___________________________
microblaze-uclinux mailing list
microblaze-uclinux@itee.uq.edu.au
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive :
http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/


___________________________
microblaze-uclinux mailing list
microblaze-uclinux@itee.uq.edu.au
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/