[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: [microblaze-uclinux] Ethernet link loss - External MAC/PHY selection
Jim,
How told you this. We are designing in the 91C111 and there was no
indication of it being obsoleted. SMSC as of today has not indicated the
status change.
Bill
-----Original Message-----
From: Jim Law [mailto:jlaw@irispower.com]
Sent: Tuesday, August 02, 2005 8:35 AM
To: microblaze-uclinux@itee.uq.edu.au
Subject: Re: [microblaze-uclinux] Ethernet link loss - External MAC/PHY
selection
Hi Tim,
Will probably be using a SMSC LAN...9115, or one in that family
(LAN9115-LAN9118). The LAN91C111 is being obsoleted, I've been told.
Jim Law
----- Original Message -----
From: "Tim Rosario" <trosario@vutek.com>
To: <microblaze-uclinux@itee.uq.edu.au>
Sent: Friday, July 22, 2005 2:01 PM
Subject: RE: [microblaze-uclinux] Ethernet link loss
> Hey Jim, just curious, have you selected a MAC/PHY combo yet? I've been
> thinking about doing this for the same reason but haven't yet. All the
> combo's I have found want a PCI interface which chews up just as much
> logic...
>
> --Tim
>
> -----Original Message-----
> From: owner-microblaze-uclinux@itee.uq.edu.au
> [mailto:owner-microblaze-uclinux@itee.uq.edu.au] On Behalf Of Jim Law
> Sent: Friday, July 22, 2005 12:34 PM
> To: microblaze-uclinux@itee.uq.edu.au
> Subject: Re: [microblaze-uclinux] Ethernet link loss
>
> Haven't licenced the core - not planning on using it in the final
> product:
> will use external MAC/PHY to save room in FPGA for my logic. I'll have
> to
> check if I did a full re-build of the bitstream before my last download
> to
> the board, but this sounds like a reasonable explanation.
>
> Thanks,
> Jim
>
> ----- Original Message -----
> From: "David Banas" <dbanas@nuhorizons.com>
> To: <microblaze-uclinux@itee.uq.edu.au>
> Sent: Friday, July 22, 2005 10:18 AM
> Subject: RE: [microblaze-uclinux] Ethernet link loss
>
>
>> Jim,
>>
>> Do you have a license for the Ethernet MAC core? If not, then this is
> the
>> behavior one would expect. The evaluation version of that core (which
> is
>> what ships with EDK) is rigged to stop working after some amount of
> time
>> after configuration and there have been reports (Xilinx doesn't
> actually
>> say
>> how long) that the timeout time is on the order of hours.
>>
>> I used a licensed version, in order to compile the "download.bit"
> file,
>> which I included in the archive. So, if you're using that file and
>> observing
>> this then something else is going on.
>>
>> Regards,
>>
>> David Banas
>> Field Applications Engineer
>> Nu Horizons Electronics Corp.
>> 2070 Ringwood Avenue
>> San Jose, CA 95131
>> (408)434-0800 - office
>> (415)846-5837 - cell
>> http://www.nuhorizons.com
>>
>>> -----Original Message-----
>>> From: owner-microblaze-uclinux@itee.uq.edu.au
> [mailto:owner-microblaze-
>>> uclinux@itee.uq.edu.au] On Behalf Of Jim Law
>>> Sent: Friday, July 22, 2005 6:33 AM
>>> To: microblaze-uclinux@itee.uq.edu.au
>>> Subject: [microblaze-uclinux] Ethernet link loss
>>>
>>> Hi all,
>>>
>>> Running uClinux on a NuHo S3-2000 board. Ethernet port connected to
> a
>>> router that is doing DHCP serving to give out an IP address
>>> (192.168.10.3).
>>>
>>> On kernal boot, I get a
>>>
>>> "Jan 1 00:01:34 dhcpcd[33]: infinite IP address lease time.
>>> Exiting"
>>>
>>> message from the DHCP client daemon in uClinux, even though the
> router is
>>> setup to give out a 1-hour lease.
>>>
>>> System stays connected while I watch it (>> 1hour) , but sometime
>>> overnight,
>>> gives
>>>
>>> "eth0: Link carrier lost.".
>>>
>>> Changing the router to give 1 week leases doesn't change anything.
> DHCP
>>> server reports that the IP address is still active. Link light on
> router
>>> is
>>> off.
>>>
>>> Thot's??
>>>
>>> Jim Law
>>> Iris Power
>>>
>>>
>>> ___________________________
>>> microblaze-uclinux mailing list
>>> microblaze-uclinux@itee.uq.edu.au
>>> Project Home Page :
> http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
>>> Mailing List Archive :
> http://www.itee.uq.edu.au/~listarch/microblaze-
>>> uclinux/
>>>
>>>
>>>
> ________________________________________________________________________
>>> This email has been scanned for all viruses by the MessageLabs Email
>>> Security System. For more information on a proactive email security
>>> service working around the clock, around the globe, visit
>>> http://www.messagelabs.com
>>>
> ________________________________________________________________________
>>
>>
>> ___________________________
>> microblaze-uclinux mailing list
>> microblaze-uclinux@itee.uq.edu.au
>> Project Home Page :
> http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
>> Mailing List Archive :
>> http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/
>>
>>
>
> ___________________________
> microblaze-uclinux mailing list
> microblaze-uclinux@itee.uq.edu.au
> Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
> Mailing List Archive :
> http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/
>
>
> ___________________________
> microblaze-uclinux mailing list
> microblaze-uclinux@itee.uq.edu.au
> Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
> Mailing List Archive :
> http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/
>
>
___________________________
microblaze-uclinux mailing list
microblaze-uclinux@itee.uq.edu.au
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive :
http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/
___________________________
microblaze-uclinux mailing list
microblaze-uclinux@itee.uq.edu.au
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/