RE: [microblaze-uclinux] uClinux compile error on "make dep"

["David Banas" <dbanas@xxxxxxxxxxxxxx>]

It looks like you're using an incorrect FLASH map for our board. If you
'diff' these 2 files, take a look at the difference between the lines that
start, "MBVanilla flash probe...", as well as the lines immediately
following those, which are describing the FLASH partitioning scheme.

In general, it looks like you've made some updates to the source tree from
my "reference" configuration, which isn't necessarily a problem. For
instance, compare your kernel version line:

Linux version 2.4.29-uc1 (root@debian) (gcc version 2.95.3-4 Xilinx EDK 6.3
Build EDK_Gmm.12.2) #1 Wed Jul 27 00:54:47 EDT 2005

with mine:

Linux version 2.4.29-uc0 (dbanas@linux) (gcc version 2.95.3-4 Xilinx EDK 6.3
Build EDK_Gmm.11.2) #4 Mon May 30 05:48:19 PDT 2005

And notice that both the Linux version and the Xilinx EDK build number are
more recent for yours than they are for mine.

Have you turned off JFFS2 file system support in your kernel build
configuration?

'flatfsd' seems happy in your boot log; have you tested it? Try putting a
dummy file in '/etc/config' and see if it stays there across a reboot.

Good luck,

David Banas
Field Applications Engineer
Nu Horizons Electronics Corp.
2070 Ringwood Avenue
San Jose, CA 95131
(408)434-0800 - office
(415)846-5837 - cell
http://www.nuhorizons.com
> -----Original Message-----
> From: owner-microblaze-uclinux@itee.uq.edu.au [mailto:owner-microblaze-
> uclinux@itee.uq.edu.au] On Behalf Of David Lai
> Sent: Wednesday, August 03, 2005 6:55 AM
> To: microblaze-uclinux@itee.uq.edu.au
> Subject: Re: [microblaze-uclinux] uClinux compile error on "make dep"
>
> Sorry about the missing attached files, my mistake.  Here are the files.
>
> Dave Lai
>
>
> ----- Original Message -----
> From: "David Banas" <dbanas@nuhorizons.com>
> To: <microblaze-uclinux@itee.uq.edu.au>
> Sent: Tuesday, August 02, 2005 6:57 PM
> Subject: RE: [microblaze-uclinux] uClinux compile error on "make dep"
>
>
> >I didn't see any files attached to this.
> >
> > David Banas
> > Field Applications Engineer
> > Nu Horizons Electronics Corp.
> > 2070 Ringwood Avenue
> > San Jose, CA 95131
> > (408)434-0800 - office
> > (415)846-5837 - cell
> > http://www.nuhorizons.com
> >
> >> -----Original Message-----
> >> From: owner-microblaze-uclinux@itee.uq.edu.au [mailto:owner-microblaze-
> >> uclinux@itee.uq.edu.au] On Behalf Of David Lai
> >> Sent: Tuesday, August 02, 2005 11:10 AM
> >> To: microblaze-uclinux@itee.uq.edu.au
> >> Subject: Re: [microblaze-uclinux] uClinux compile error on "make dep"
> >>
> >> Thanks all,
> >>
> >>     for the replys that has helped me successfully compiled the uClinux
> >> Kernel.  However, during kernel boot-up, it appears that the output
> from
> >> my
> >> kernel is different than the output from the kernel prepared by David
> >> Banas.
> >> I've attached 2 txt files, CAPTURE.TXT is the output from my kernel
> >> during
> >> boot, and CAPTURE2.TXT is the output from David Banas' kernel during
> >> boot.
> >> The major difference seems to be the absence of the configuration of
> >> JFFS2
> >> from my kernel.  Thoughts?
> >>
> >> Regards,
> >> Dave Lai
> >>
> >> ___________________________
> >> microblaze-uclinux mailing list
> >> microblaze-uclinux@itee.uq.edu.au
> >> Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
> >> Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-
> >> uclinux/
> >>
> >>
> >>
> ________________________________________________________________________
> >> This email has been scanned for all viruses by the MessageLabs Email
> >> Security System. For more information on a proactive email security
> >> service working around the clock, around the globe, visit
> >> http://www.messagelabs.com
> >>
> ________________________________________________________________________
> >
> >
> > ___________________________
> > microblaze-uclinux mailing list
> > microblaze-uclinux@itee.uq.edu.au
> > Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
> > Mailing List Archive :
> > http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/
> >
> >
>
>
> ________________________________________________________________________
> This email has been scanned for all viruses by the MessageLabs Email
> Security System. For more information on a proactive email security
> service working around the clock, around the globe, visit
> http://www.messagelabs.com
> ________________________________________________________________________


___________________________
microblaze-uclinux mailing list
microblaze-uclinux@itee.uq.edu.au
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/