Re: [microblaze-uclinux] uClinux compile error on "make dep"

["David Lai" <dlai@xxxxxxxxxxxxx>]

Running "make menuconfig" again, I've noticed the support for JFFS2 file 
system isn't on by default.  I will recompile the kernel again, with the 
support for JFFS2 turned on this time.  In addition, I've tried putting a 
dummy file in 'etc/config' but it did not stay across a reboot.

Thank you,
Dave Lai

----- Original Message ----- 
From: "David Banas" <dbanas@nuhorizons.com>
To: <microblaze-uclinux@itee.uq.edu.au>
Sent: Wednesday, August 03, 2005 11:35 AM
Subject: RE: [microblaze-uclinux] uClinux compile error on "make dep"


> It looks like you're using an incorrect FLASH map for our board. If you
> 'diff' these 2 files, take a look at the difference between the lines that
> start, "MBVanilla flash probe...", as well as the lines immediately
> following those, which are describing the FLASH partitioning scheme.
>
> In general, it looks like you've made some updates to the source tree from
> my "reference" configuration, which isn't necessarily a problem. For
> instance, compare your kernel version line:
>
> Linux version 2.4.29-uc1 (root@debian) (gcc version 2.95.3-4 Xilinx EDK 
> 6.3
> Build EDK_Gmm.12.2) #1 Wed Jul 27 00:54:47 EDT 2005
>
> with mine:
>
> Linux version 2.4.29-uc0 (dbanas@linux) (gcc version 2.95.3-4 Xilinx EDK 
> 6.3
> Build EDK_Gmm.11.2) #4 Mon May 30 05:48:19 PDT 2005
>
> And notice that both the Linux version and the Xilinx EDK build number are
> more recent for yours than they are for mine.
>
> Have you turned off JFFS2 file system support in your kernel build
> configuration?
>
> 'flatfsd' seems happy in your boot log; have you tested it? Try putting a
> dummy file in '/etc/config' and see if it stays there across a reboot.
>
> Good luck,
>
> David Banas
> Field Applications Engineer
> Nu Horizons Electronics Corp.
> 2070 Ringwood Avenue
> San Jose, CA 95131
> (408)434-0800 - office
> (415)846-5837 - cell
> http://www.nuhorizons.com
>> -----Original Message-----
>> From: owner-microblaze-uclinux@itee.uq.edu.au [mailto:owner-microblaze-
>> uclinux@itee.uq.edu.au] On Behalf Of David Lai
>> Sent: Wednesday, August 03, 2005 6:55 AM
>> To: microblaze-uclinux@itee.uq.edu.au
>> Subject: Re: [microblaze-uclinux] uClinux compile error on "make dep"
>>
>> Sorry about the missing attached files, my mistake.  Here are the files.
>>
>> Dave Lai
>>
>>
>> ----- Original Message -----
>> From: "David Banas" <dbanas@nuhorizons.com>
>> To: <microblaze-uclinux@itee.uq.edu.au>
>> Sent: Tuesday, August 02, 2005 6:57 PM
>> Subject: RE: [microblaze-uclinux] uClinux compile error on "make dep"
>>
>>
>> >I didn't see any files attached to this.
>> >
>> > David Banas
>> > Field Applications Engineer
>> > Nu Horizons Electronics Corp.
>> > 2070 Ringwood Avenue
>> > San Jose, CA 95131
>> > (408)434-0800 - office
>> > (415)846-5837 - cell
>> > http://www.nuhorizons.com
>> >
>> >> -----Original Message-----
>> >> From: owner-microblaze-uclinux@itee.uq.edu.au 
>> >> [mailto:owner-microblaze-
>> >> uclinux@itee.uq.edu.au] On Behalf Of David Lai
>> >> Sent: Tuesday, August 02, 2005 11:10 AM
>> >> To: microblaze-uclinux@itee.uq.edu.au
>> >> Subject: Re: [microblaze-uclinux] uClinux compile error on "make dep"
>> >>
>> >> Thanks all,
>> >>
>> >>     for the replys that has helped me successfully compiled the 
>> >> uClinux
>> >> Kernel.  However, during kernel boot-up, it appears that the output
>> from
>> >> my
>> >> kernel is different than the output from the kernel prepared by David
>> >> Banas.
>> >> I've attached 2 txt files, CAPTURE.TXT is the output from my kernel
>> >> during
>> >> boot, and CAPTURE2.TXT is the output from David Banas' kernel during
>> >> boot.
>> >> The major difference seems to be the absence of the configuration of
>> >> JFFS2
>> >> from my kernel.  Thoughts?
>> >>
>> >> Regards,
>> >> Dave Lai
>> >>
>> >> ___________________________
>> >> microblaze-uclinux mailing list
>> >> microblaze-uclinux@itee.uq.edu.au
>> >> Project Home Page : 
>> >> http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
>> >> Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-
>> >> uclinux/
>> >>
>> >>
>> >>
>> ________________________________________________________________________
>> >> This email has been scanned for all viruses by the MessageLabs Email
>> >> Security System. For more information on a proactive email security
>> >> service working around the clock, around the globe, visit
>> >> http://www.messagelabs.com
>> >>
>> ________________________________________________________________________
>> >
>> >
>> > ___________________________
>> > microblaze-uclinux mailing list
>> > microblaze-uclinux@itee.uq.edu.au
>> > Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
>> > Mailing List Archive :
>> > http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/
>> >
>> >
>>
>>
>> ________________________________________________________________________
>> This email has been scanned for all viruses by the MessageLabs Email
>> Security System. For more information on a proactive email security
>> service working around the clock, around the globe, visit
>> http://www.messagelabs.com
>> ________________________________________________________________________
>
>
> ___________________________
> microblaze-uclinux mailing list
> microblaze-uclinux@itee.uq.edu.au
> Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
> Mailing List Archive : 
> http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/
>
> 

___________________________
microblaze-uclinux mailing list
microblaze-uclinux@itee.uq.edu.au
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/