Re: [microblaze-uclinux] EDK / ISE Tools

[Todd Harless <tharless@xxxxxxxxx>]

I am not too familiar with the Xilinx multimedia board but I can tell
you that I have installed ucLinux on my board (XUPV2PRO:
www.digilentinc.com) and the ISE/ EDK v7.x seems to work fine. If there
is a problem using the 7.x series of the ISE/EDK software, it is
probably just having to change some parameters around to meet your
needs. Is your problem not being able to find the board in the BSB of
EDK?

On 9/6/05, V R <r_fpga_dev@yahoo.com> wrote:

Hi all.

I am having difficulty obtaining the older 6.3 ISE/EDK
tools .  At the moment I have the latest 7.1
toolchain.

Is there any hope of getting uCLinux working with this
chain, or do I have to find the older tools?

Thank you.
R.

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
___________________________
microblaze-uclinux mailing list
microblaze-uclinux@itee.uq.edu.au
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/