RE: [microblaze-uclinux] Kernel Compilation Error

["Deli Geng \(David\)" <deli.geng@xxxxxxxxxxxx>]

Hi,

After the changes to the tool chain and the source code, have you tried a
new make? For example,

make clean
make menuconfig
make dep

and eventually,

make

Cheers
David

-----Original Message-----
From: owner-microblaze-uclinux@itee.uq.edu.au
[mailto:owner-microblaze-uclinux@itee.uq.edu.au] On Behalf Of
calayrac@univ-orleans.fr
Sent: 13 September 2005 14:48
To: microblaze-uClinux
Subject: [microblaze-uclinux] Kernel Compilation Error



Dear Jason,

I follow instruction in your las email regarding the last patch
(uClinux-dist.diff) from John.

In the mean time I read on mailling list that you recommand also to patch
first
(eq before uClinux-dist.diff):
include.diff, tools.diff, uClibc.diff, vendor-config.diff and
vendor-xilinx.diff.

So I patch all these files. But When I start Kernel compilation it comes out
whith  an error message during make dep processing with a message that
looklike
something like :
unable to find rools to  make 
/MicroBlaze-elf-tools/lib/gcc-lib/microblaze/2.95.3-4/include/starg.h
necessary for dfs...

In fact I've removed old tollchain from my computer. I decide then to
install
back old toll chain (tar -xzf microblaze-elf-tools-20050308.tar.gz) and then
the
3.4.1 tool chain (tar -xzf microblaze-elf-tools-20050830.tar.gz).

Compilation then pass some over steps but cames out with a knew error
message :
make[2]: Entering directory `/home/alayrac/uClinux-dist/user/version'
ucfront-gcc mb-gcc  -Os -g -fomit-frame-pointer -fno-common -fno-builtin
-Wall 
 -mxl-soft-mul -mxl-barrel-shift -mno-xl-soft-div  -DEMBED -Dlinux
-D__linux__
-Dunix -D__uClinux__   -c -o version.o version.c
version.c: In function `main':
version.c:24: warning: implicit declaration of function `memset'
version.c:32: warning: implicit declaration of function `exit'
version.c:109: warning: control reaches end of non-void function
ucfront-gcc mb-gcc  -Wl,-elf2flt -o version version.o
ucfront-gcc mb-gcc  -Os -g -fomit-frame-pointer -fno-common -fno-builtin
-Wall 
 -mxl-soft-mul -mxl-barrel-shift -mno-xl-soft-div  -DEMBED -Dlinux
-D__linux__
-Dunix -D__uClinux__   -c -o stamp.o stamp.c
make[2]: Leaving directory `/home/alayrac/uClinux-dist/user/version'
make[2]: Entering directory
`/home/alayrac/uClinux-dist/vendors/Xilinx/uclinux-auto'
Makefile:216: *** les commandes commencent avant la première cible. Arrêt.
make[2]: Leaving directory
`/home/alayrac/uClinux-dist/vendors/Xilinx/uclinux-auto'
make[1]: *** [all] Erreur 2
make[1]: Leaving directory `/home/alayrac/uClinux-dist/user'
make: *** [subdirs] Erreur 1


To download the kernel source I follow the next step:
cvs -d:pserver:anonymous@cvs.uclinux.org:/var/cvs login
cvs -z3 -d:pserver:anonymous@cvs.uclinux.org:/var/cvs co uClinux-dist
cvs -z3 -d:pserver:anonymous@cvs.uclinux.org:/var/cvs co uClinux-2.4.x

then from both directories uClinux-dist and uClinux-2.4.x I've proceed a cvs
update.

I guess that all these informations will help you to Identify the error.

(For Information my final target is Spartan IIE on SpartanIIELC Memec board)

Note: I read your instruction manual for ML401 board (thanks for this nice
job),
I think that it would be direct to port it to ML403 (I think that its the
same
board as ML401 with different FPGA, ML403 as the FPGA with embeded PowerPC).

Do you think that it could be a good start for the beginer I'm to first work
with that ML403 board and then to turn back to my SpatanIIE board?
Regards

Christophe
___________________________
microblaze-uclinux mailing list
microblaze-uclinux@itee.uq.edu.au
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive :
http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/


___________________________
microblaze-uclinux mailing list
microblaze-uclinux@itee.uq.edu.au
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/