Re: Re: [microblaze-uclinux] creating uClinux kernel image

[<elynum@xxxxxxx>]

I don't have that.  That is the problem but I didn't think I needed that.  I have the xilinx tools on a windows computer.  I've been just doing the kernel stuff in linux.   Do I have to install the xilinx 7.1 tools in Linux?
> 
> From: Jason Wu <wu@itee.uq.edu.au>
> Date: 2005/09/27 Tue AM 01:04:06 EDT
> To: microblaze-uclinux@itee.uq.edu.au
> Subject: Re: [microblaze-uclinux] creating uClinux kernel image
> 
> Hi Elynum
> 
> >I'm trying to create the uClinux kernel image and  I'm following the Microblace uClinux document 1.01 and everything works fine until I get to the end and I try to build the image and type make dep.
> >  
> >
> >This is what I get.
> >
> >realpath(/include) failed, No such file or directory
> >make[3]: *** [fastdep] Error 1
> >make[3]: Leaving directory `/root/uClinux-2.4.x/arch/microblaze/kernel'
> >make[2]: *** [_sfdep_arch/microblaze/kernel] Error 2
> >make[2]: Leaving directory `/root/uClinux-2.4.x'
> >make[1]: *** [dep-files] Error 2
> >make[1]: Leaving directory `/root/uClinux-2.4.x'
> >make: *** [dep] Error 2
> >  
> >
> I think this error is due to missing mb-gcc tool chain path.
> Can you double check your tools path, make sure the mb-gcc tool chain 
> path "/usr/local/microblaze-elf-tools/bin" shows before the regular 
> Xilinx tools path.
> 
> Regards,
> 
> Jason
> ___________________________
> microblaze-uclinux mailing list
> microblaze-uclinux@itee.uq.edu.au
> Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
> Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/
> 
> 

___________________________
microblaze-uclinux mailing list
microblaze-uclinux@itee.uq.edu.au
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/