Re:[microblaze-uclinux] StarterKit+uClinux beginer

[<support@xxxxxxxxxxx>]

Hi Pavel,
   Thanks.  I missed the OPB_SDRAM the first time through the list.

   I'll give that a try using a Micron 16Mx16 SDRAM. But first, to 
get a little PCB made...

Thanks again,

Jeff

On Tue, 27 Sep 2005 08:46:46 +0500, "Pavel Ivanchenko" <pi-
home@udm.net> wrote :

> Hi Jeff,
> I use OPB SDRAM core existing in EDK.
> 
> ----- Original Message ----- 
> From: <support@xylotex.com>
> To: <microblaze-uclinux@itee.uq.edu.au>
> Sent: Tuesday, September 27, 2005 1:08 AM
> Subject: Re:[microblaze-uclinux] StarterKit+uClinux beginer
> 
> 
> >
> >
> > Hi Pavel,
> >  OK, thanks.
> >  Did you create your own IP Core, or did you use an existing one 
for
> > the SDRAM memory interface (and if the second, where did you get 
it)?
> >
> > Thanks again,
> >
> > Jeff
> >
> > On Mon, 26 Sep 2005 23:19:48 +0500, "Pavel Ivanchenko" <pi-
> > home@udm.net> wrote :
> >
> >> Hi Jeff,
> >> I make itself simply one layer PCB to A1 connector and 5 wire 
via
> > A2
> >> connector.
> >>
> >> ----- Original Message ----- 
> >> From: <support@xylotex.com>
> >> To: <microblaze-uclinux@itee.uq.edu.au>
> >> Sent: Sunday, September 25, 2005 9:36 AM
> >> Subject: Re:[microblaze-uclinux] StarterKit+uClinux beginer
> >>
> >>
> >> > Hi Pavel ,
> >> >
> >> >  I also have a Spartan-3 Starter kit, and am interested in 
where
> >> > you got the external SDRAM (16Mx16) add-on board from.  Did 
you
> > make
> >> > it yourself or buy it?
> >> >
> >> > Thanks,
> >> >
> >> > Jeff
> >> >
> >> >> -----Original Message-----
> >> >> From: owner-microblaze-uclinux@itee.uq.edu.au [mailto:owner-
> >> > microblaze-
> >> >> uclinux@itee.uq.edu.au] On Behalf Of Pavel Ivanchenko
> >> >> Sent: Friday, August 19, 2005 7:51 AM
> >> >> To: microblaze-uclinux@itee.uq.edu.au
> >> >> Subject: [microblaze-uclinux] StarterKit+uClinux beginer
> >> >>
> >> >> Hi, sorry for my poor English.
> >> >>
> >> >> I have Xilinx StarterKit (Spartan3-200 rev E) and I want run
> >> > uClinux on
> >> >> this
> >> >> board.
> >> >> First step I connect external SDRAM (16Mx16) from onboard
> >> > connectors (work
> >> >> correctly, I tested).
> >> >> Next I download uClinux distributives from www.uclinux.org 
and
> >> > packages
> >> >> from
> >> >> http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux/.
> >> >> Next I generate "auto-config.in" file and compile uClinux 
image.
> >> >> Next I download image thought  XMD to SDRAM and run it.
> >> >> But  booting process stopped in "Calibrate delay loop :" :(
> >> >>
> >> >
> >> > ___________________________
> >> > microblaze-uclinux mailing list
> >> > microblaze-uclinux@itee.uq.edu.au
> >> > Project Home Page : 
http://www.itee.uq.edu.au/~jwilliams/mblaze-
> > uclinux
> >> > Mailing List Archive :
> >> > http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/
> >> >
> >>
> >> ___________________________
> >> microblaze-uclinux mailing list
> >> microblaze-uclinux@itee.uq.edu.au
> >> Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-
> > uclinux
> >> Mailing List Archive :
> > http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/
> >>
> >>
> >>
> >>
> > ___________________________
> > microblaze-uclinux mailing list
> > microblaze-uclinux@itee.uq.edu.au
> > Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-
uclinux
> > Mailing List Archive : 
> > http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/
> > 
> 
> ___________________________
> microblaze-uclinux mailing list
> microblaze-uclinux@itee.uq.edu.au
> Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-
uclinux
> Mailing List Archive : 
http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/
> 
> 
> 
> 
___________________________
microblaze-uclinux mailing list
microblaze-uclinux@itee.uq.edu.au
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/