Re: [microblaze-uclinux] export

[Syed Irfan <irfan@xxxxxxxxxxxxxx>]

Hi,

Yes I have tested the tools (6.3) under suse 9.2 and 9.3. I have not 
tried the xilinx tools v7.1 yet. Downloading the bitstream takes longer 
with 2.6 kernel. I guess the linuxdriver (for parallel cable IV) is 
geared towards running on 2.4 rather than 2.6 kernels.

cheers
Irfan

Wlovell wrote:
> I the interim, I have gotten the chain to export, but I was still 
> wondering if anyone has run the EDK under SuSE. The EDK and ISE error 
> out will loading.
> 
> ------------------------------------------------------------------------
> *From:* Wlovell [mailto:wlovell@c-linksystems.com]
> *Sent:* Wednesday, September 28, 2005 11:16 AM
> *To:* microblaze-uclinux@itee.uq.edu.au
> *Subject:* [microblaze-uclinux] export
> 
> To all,
> Again being new at Linux, has anyone run the tool chain under SuSE? Can 
> not get the tool chain path exported to run a make dep.
>  
> Thank you for all information
>  
> 
> William Lovell, Senior Design Engineer
> 
> PSoC Consultant
> 
> c-Link Systems, Inc.
> 
> 212 Kahkonen Rd.
> 
> Norway, ME 04268-5312
> 
> P - 207-743-0002
> 
> _wlovell@c-linksystems.com <mailto:wlovell@c-linksystems.com>_
> 
> _www.c-linksystems.com <http://www.c-linksystems.com/>_
> 
>  

___________________________
microblaze-uclinux mailing list
microblaze-uclinux@itee.uq.edu.au
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/