[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [microblaze-uclinux] export
I'm using Xilinx tools 7.1 on Suse 9.1.
Like you I have trouble to get fast download speed.
I tried to build and install the driver for kernel 2.6 (there is a FAQ
on this subject here
but Impact continue to complains
that xpc4drv is not loaded and runs at 200KHz (Parallel cable III mode).
Does anyone has tried the Xilinx USB cable with Linux kernel 2.6?
Syed Irfan wrote:
> Yes I have tested the tools (6.3) under suse 9.2 and 9.3. I have not
> tried the xilinx tools v7.1 yet. Downloading the bitstream takes
> longer with 2.6 kernel. I guess the linuxdriver (for parallel cable
> IV) is geared towards running on 2.4 rather than 2.6 kernels.
> Wlovell wrote:
>> I the interim, I have gotten the chain to export, but I was still
>> wondering if anyone has run the EDK under SuSE. The EDK and ISE error
>> out will loading.
>> *From:* Wlovell [mailto:firstname.lastname@example.org]
>> *Sent:* Wednesday, September 28, 2005 11:16 AM
>> *To:* email@example.com
>> *Subject:* [microblaze-uclinux] export
>> To all,
>> Again being new at Linux, has anyone run the tool chain under SuSE?
>> Can not get the tool chain path exported to run a make dep.
>> Thank you for all information
>> William Lovell, Senior Design Engineer
>> PSoC Consultant
>> c-Link Systems, Inc.
>> 212 Kahkonen Rd.
>> Norway, ME 04268-5312
>> P - 207-743-0002
>> firstname.lastname@example.org <mailto:email@example.com>_
>> _www.c-linksystems.com <http://www.c-linksystems.com/>_
> microblaze-uclinux mailing list
> Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
> Mailing List Archive :
microblaze-uclinux mailing list
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/