Hi Brett
You can download the ml401 uClinux platform from
http://www.itee.uq.edu.au/~wu/downloads/ml401_uclinux_demo.tar.gz, This
platform is base on uClinux_ready_MicroBlaze_design documentation.
Regards,
Jason
Brett Boren wrote:
Stupid user problem. I hadn't run make distclean after
mistakenly
running `make menuconfig` before I had my correct (and corrected)
auto-config.in in the right
place. Now I've got a base system working.
However, I would still like to see the ml401 platform updated to be
useable under 7.1. Currently the 6.3 to 7.1 conversion process breaks
it.
Brett
On 10/3/05, Jason Wu <wu@itee.uq.edu.au> wrote:
Brett
Boren wrote:
> Ah... my fault. Actually I was really going for a build on the
ml401
> board and/or the classic v2mb1000. I'm trying to use Jason's ml401
> howto to build my hardware under windows and build my kernel under
> linux (would love to do it all under linux, but I'm running Gentoo
and
> already have too much other software loaded to wipe and install
CentOS)
>
> Jason Wu,
> It might be helpful to put up a finished product based on the
HOWTO
> you and John put together. Also, I missed a typo on the howto on
page
> 22 step 46: the parameter is C_USE_UART not C_USE_UART_WIDTH.
>
Good idea, I will do that during this weekend.
Thanks for the correction.
Thanks
Jason
___________________________
microblaze-uclinux mailing list
microblaze-uclinux@itee.uq.edu.au
Project Home Page :
http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/
|