Jason, I'm including a word document which has the error I get after I do a make just zoom in and you should see the error I'm getting. Let me know if you can't read it or not. Thanks for all your help! I'm at my wits end going crazy because I've made the image file before but now I can't. I'll disable the flash setting. I don't know why I enabled it and change the auto-config file from dos and see what happens. > > From: Jason Wu <wu@itee.uq.edu.au> > Date: 2005/10/07 Fri AM 07:10:35 EDT > To: microblaze-uclinux@itee.uq.edu.au > Subject: Re: [microblaze-uclinux] error when compile > > Hi Eric > > The .config file will appear after you done kernel configuration. The > image directory will be del after "make distclean" > If you don't have Flash, why did you enable "CFI FLASH device mapped on > Microblaze auto config"? > Anyway, what errors are you getting during make all process? > > I try the auto-config.in on my machine. No error during kernel compilation. > But I do notice the auto-config.in is in dos format, so i convert the > file format into unix format. > $ vi auto-config.in > to change from do to unix > :set ff=unix > to save the file and exit vim > :wq > > In the Kernel Configuration, I only change the followings( compare to > default settings). > Processor type and features ---> > < > Ethernet driver > General setup ---> > [ ] Networking support > Memory Technology Devices (MTD) ---> > Mapping drivers for chip access ---> > < > CFI Flash device mapped on MicroBlaze auto-config (uClinux) > > Regards, > > Jason > > > Eric Lynum wrote: > > > I couldn't find a .config file in the config directory under > > uclinux_dist directory. Was there another place this .config file > > could be? Also, my image directory disappeared. > > > > > > > > These are the options I chose > > > > Vendor Product Selection *Xilinx > > > > Kernel Library Defaults Selection * uclibC > > > > Code maturity level Options * Prompt for development and /or > > incomplete code/drivers > > > > Loadable Module Support: *Enable loadable module support > > > > Process type and features: *uclinux Auto Platform > > > > *kernel cmdline support > > > > *Enable debug logging > > > > General Setup: (Elf) Kernel core > > > > Kernel support for flat binaries > > > > Enable Zflat support > > > > > > > > MTD Support: *MTD partitioning support > > > > *Direct character device access to MTD > > > > *caching block device acess to MTD > > > > > > > > Detect Flash Chips by CFI probe > > > > Detect JEDEC > > > > Support for Intel/Sharp Flash > > > > Support for Ram Chips > > > > > > > > Mapping Drivers for Chip Access > > > > CFI FLASH device mapped on Microblaze auto config > > > > *None (Flash size) > > > > Generic uclinux RAM/ROM file system support > > > > > > > > > > > >
Attachment:
Error.doc
Description: Error.doc