[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: [microblaze-uclinux] error when compile
Hi Eric,
You asked if you need to follow my instructions, the details I gave are just
what I have done, it's not required to follow them. The reason I did all the
stuff with editing testmem was because I found the 'con 0x8000000' command
seemed to be quite temperamental and the processor would randomly stop, with
the method I used I could close the XMD and then boot.
Ps, Thanks John for updating the CVS, I can finally build the newest
version!
Pps,Eric I'm a him!
Cheers
Emile
-----Original Message-----
From: owner-microblaze-uclinux@itee.uq.edu.au
[mailto:owner-microblaze-uclinux@itee.uq.edu.au] On Behalf Of Eric Lynum
Sent: 09 October 2005 06:57
To: microblaze-uclinux@itee.uq.edu.au
Subject: RE: [microblaze-uclinux] error when compile
Hi John thanks,
I haven't done the cvs update yet but I took the image files that were
created and I'm still having problems getting the kernel to boot. I've
enclosed my auto-config file which I have used to make the kernel now and
now after running dow -data image5.bin 0x80000000 and con 0x80000000, I get
this error Microblaze pipeline stalled executing instruction at >> PC:
0x80000000c. Try resetting the processor to continue. I tried to follow
Emile's document on changing the testmem.c file and changing the microblaze
version from 4 to 3.00. Should I do that or is that unneeded.
-----Original Message-----
From: owner-microblaze-uclinux@itee.uq.edu.au
[mailto:owner-microblaze-uclinux@itee.uq.edu.au] On Behalf Of John Williams
Sent: Saturday, October 08, 2005 11:41 PM
To: microblaze-uclinux@itee.uq.edu.au
Subject: Re: [microblaze-uclinux] error when compile
Hi Eric,
Eric Lynum wrote:
> I have no idea why this happened but I commented out in mmap.c under the
> mmnomu directory this section calling for a romptr and I was able to build
> the image.bin and elf files. Any ideas on what this code was doing?
OK, so this one's beyond your control :) There's been some work going
on in the MM part of the CVS lately, looks like microblaze got affected.
Change to uClinux-2.4.x/arch/microblaze/platforms and do
$ cvs update Rules.make
That will pick up a one-liner fix that I just committed to CVS, and you
should be back in business.
Regards,
John
___________________________
microblaze-uclinux mailing list
microblaze-uclinux@itee.uq.edu.au
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive :
http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/
___________________________
microblaze-uclinux mailing list
microblaze-uclinux@itee.uq.edu.au
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/