Re: [microblaze-uclinux] kernel won't boot

["Hurni Daniel" <hurnd@xxxxxx>]

In the dl.sh script that I have the memory adress doesn't seem to be
hardcoded.
I tried to download the kernel image manually with xdm.
These are the commands i used:

xload mhs system.mhs
connect mb mdm -bscan USER1
dow -data /tftpboot/image.bin 0x24000000
con 0x24000000

0x24000000 is the memory adress.
Are these the right commands, because I still don't see anything in minicom?


John Williams wrote:

>Hi Daniel,
>
>Daniel Hurni wrote:
>
>  
>
>>After the memory test passed, I compilled the kernel and downloaded it
>>with dl.sh. Do I need to do anything else ? I have no output on minicom
>>after the memory test.
>>    
>>
>
>Be careful with dl.sh - it's an old script and has the memory base
>address hard coded in it.  Make sure that it matches the actual address
>of your memory where the kernel is.
>
>Regards,
>
>John
>___________________________
>microblaze-uclinux mailing list
>microblaze-uclinux@xxxxxxxxxxxxxx
>Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
>Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/
>
>  
>
___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/