Re: [microblaze-uclinux] kernel won't boot

["Hurni Daniel" <hurnd@xxxxxx>]

I use the FSL connection. XMD is reporting the mdm connected
and I can read the memory contents at 0x24000000, but I don't know what
the content should be.
At  0x24000000 I have 94208001.
I also checked the reset polarity and the clocking and they seem to be
correct.

John Williams wrote:

>Hurni Daniel wrote:
>  
>
>>In the dl.sh script that I have the memory adress doesn't seem to be
>>hardcoded.
>>I tried to download the kernel image manually with xdm.
>>These are the commands i used:
>>
>>xload mhs system.mhs
>>connect mb mdm -bscan USER1
>>dow -data /tftpboot/image.bin 0x24000000
>>con 0x24000000
>>    
>>
>
>Something else to check - are you using the fast download FSL connection
>between the OPB_MDM and the microblaze?  If so:
>
>1.  Is XMD reporting it detected, after the "connect" command?
>2.  Double check the reset polarity and clocking to the FSL link in your
>MHS file.  After doing the kernel download, can you read back the memory
>contents at 0x24000000?  Are they correct?
>
>John
>___________________________
>microblaze-uclinux mailing list
>microblaze-uclinux@xxxxxxxxxxxxxx
>Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
>Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/
>
>  
>
___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/