Daniel, I have the exact same problem except my memory contents are at 0x30000000 and I can also read the memory contents and it is also 94208001 but my kernel won't boot. -----Original Message----- From: owner-microblaze-uclinux@xxxxxxxxxxxxxx [mailto:owner-microblaze-uclinux@xxxxxxxxxxxxxx] On Behalf Of Hurni Daniel Sent: Thursday, February 02, 2006 4:27 AM To: microblaze-uclinux@xxxxxxxxxxxxxx Subject: Re: [microblaze-uclinux] kernel won't boot I use the FSL connection. XMD is reporting the mdm connected and I can read the memory contents at 0x24000000, but I don't know what the content should be. At 0x24000000 I have 94208001. I also checked the reset polarity and the clocking and they seem to be correct. John Williams wrote: >Hurni Daniel wrote: > > >>In the dl.sh script that I have the memory adress doesn't seem to be >>hardcoded. >>I tried to download the kernel image manually with xdm. >>These are the commands i used: >> >>xload mhs system.mhs >>connect mb mdm -bscan USER1 >>dow -data /tftpboot/image.bin 0x24000000 >>con 0x24000000 >> >> > >Something else to check - are you using the fast download FSL connection >between the OPB_MDM and the microblaze? If so: > >1. Is XMD reporting it detected, after the "connect" command? >2. Double check the reset polarity and clocking to the FSL link in your >MHS file. After doing the kernel download, can you read back the memory >contents at 0x24000000? Are they correct? > >John >___________________________ >microblaze-uclinux mailing list >microblaze-uclinux@xxxxxxxxxxxxxx >Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux >Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/ > > > ___________________________ microblaze-uclinux mailing list microblaze-uclinux@xxxxxxxxxxxxxx Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/
Attachment:
auto-config.in
Description: Binary data