Re: [microblaze-uclinux] 91c111 over emc

[George Smith <gesmith@xxxxxxxxxxxxxxxxxx>]

hi
 Is the packet getting on to the ethernet? If then ethereal can make
you're analysis much easier.
gesmith


On Mon, 2006-02-13 at 05:00, Matthias Heise wrote:
> Hi George,
> 
> thanks very much for this offer, but I think my problems are on software 
> side at the moment. I use the 91c111 driver that came with the xilinx 
> web_server example and the modified xilnet library. I now can read and 
> write the registers but I think something in the transmission still goes 
> wrong. The web_server example is still not running i.e. I can't connect 
> to it. I made some terminal outputs and can observe that there is 
> something received but either it is wrong or corrupt data or there is 
> one ore more errors on the way through the library functions. I attached 
> the received data frame coming from the browser. Does anyone know what 
> this has to look like in order to be a correct request ?
> Thanks and regards
> Matthias
> 
> George Smith schrieb:
> 
> >hi
> > I do use the smcsc 91c111. I do not use any Xilinx cores to interface
> >to it. I do have a verilog based pcore that you could try if you'd like.
> >gesmith
> >
> >
> >On Thu, 2006-02-09 at 05:13, Matthias Heise wrote:
> >  
> >
> >>Hello ,
> >>can anyone imagine why I only read 0xFFFF out of the PHY registers of 
> >>the SMSC ? I'm able to write and read the direct accessible registers ok 
> >>, I use a memec-example code/driver for the chip. I checked the phy_read 
> >>and _write routines and think they are correct. Does anyone run this 
> >>combination SMSC 91c111, opb_emc, modified xilnet lib, and the 
> >>web_server example successfully ?
> >>    
> >>
-- 
George Smith
VP Engineering
Linear Acoustic, Inc

___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/