Re: [microblaze-uclinux] Problem in Downloading uclinux kernel

[Paul Hartke <phartke@xxxxxxxxxxxx>]

You should use image.bin instead.

While targeted to ml401 (very similar to ml402),
http://www.itee.uq.edu.au/~wu/downloads/uClinux_ready_Microblaze_design.pdf
is an excellent overview of the whole procedure to getting Microblaze
uclinux up and running on a Base System Builder (BSB) enabled board.  Its
worth checking out.

Paul

Quoting Sanjay Patel <sanjay.patel@xxxxxxxxxxxxxx>:
> I am facing the problem in downloading uclinux kernel and how to verify
> that my kernel is successfully installed.
>
> My steps of download are as under:
> I have downloaded uClinux kernel image (image.elf)  on ML 402 board of
> Xililnx in the following way  using XMD stub: (In windows XP)
>
> $Connect mb  mdm -cable type xilinx_parallel
> $dow image.elf
>
> section .text :  0x80000000 - 0x8010c040
> section .intv :   0x8010c040 - 0x8010c0a8
> section .init :   0x80119000 - 0x80125000
> section .data : 0x8010c0a8  - 0x80118020
> section .bss :  0x80125000 - 0x801450c0a8
>
> It shows that image downloaded successfully.
> Currently PC is at location 0x80000000.
>
> Can anyone please guide me about where should I keep the kernel image ?
> How to boot kernel once downloaded?
> Is there any mechanism to boot kernel image automatically ?(Eg. Boot
> Loader)
> How can we provide bootloader?
> If Boot loader is available, then at which location & in which memory
> should it lie?
>
>
> Regads
>
> Sanjay Patel
> Embedded Engineer - Embedded Division
> eInfochips Ltd
> Phone: +91-79-55425187, 55457574 -Ext-118
> Mobile: 98980-84637
>
>
___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/