[microblaze-uclinux] XMD cableIV DeviceIoControl LPT_WRITE_CMD_BUFFER Failed

[Marco Cavallini <arm.linux@xxxxxxxxxxxxxxxx>]

Is someone experienced with this issue during download with a 'fast' 
Cable IV connection:
 DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.
I am forced to use Cable III connection (longer) to complete the operation.

TIA


Xilinx Microprocessor Debug (XMD) Engine
Xilinx EDK 7.1.2 Build EDK_H.12.5.1
Copyright (c) 1995-2005 Xilinx, Inc.  All rights reserved.

  -snip-

Executing Connect Cmd: connect mb mdm -cable type xilinx_parallel port LPT1
frequency 5000000 -debugdevice cpunr 1
Connecting to cable (Parallel Port - LPT1).
Checking cable driver.
 Driver windrvr6.sys version = 6.2.2.2. LPT base address = 0378h.
 ECP base address = 0778h.
 ECP hardware is detected.
Cable connection established.
Connecting to cable (Parallel Port - LPT1) in ECP mode.
Checking cable driver.
 Driver xpc4drvr.sys version = 1.0.4.0. LPT base address = 0378h.
 Cable Type = 1, Revision = 3.
 Setting cable speed to 5 MHz.
Cable connection established.

  -snip-

JTAG MDM Connected to MicroBlaze 1
Connected to "mb" target. id = 0
Starting GDB server for "mb" target (id = 0) at TCP port no 1234

XMD% dow -data image.bin 0x10200000
 DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.
 DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.


--
/marco

--
Marco Cavallini
Koan s.a.s. - Bergamo - ITALIA
Embedded and Real-Time Software Engineering
www.koansoftware.com    |    www.klinux.org

Informativa D.Lgs 196/2003 (Privacy)
http://www.koansoftware.com/it/prf_privacy.htm
___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/