Re: [microblaze-uclinux] Microblaze4 slow kernel download with XMD

[Marco Cavallini <arm.linux@xxxxxxxxxxxxxxxx>]

> It seems you have a problem with the cable or printer port. 


I have almost the same problem like many other people
and I wonder how could I make it working properly fast.
TIA

  -snip-

Executing Connect Cmd: connect mb mdm -cable type xilinx_parallel port LPT1
frequency 5000000 -debugdevice cpunr 1
Connecting to cable (Parallel Port - LPT1).
Checking cable driver.
 Driver windrvr6.sys version = 6.2.2.2. LPT base address = 0378h.
 ECP base address = 0778h.
 ECP hardware is detected.
Cable connection established.
Connecting to cable (Parallel Port - LPT1) in ECP mode.
Checking cable driver.
 Driver xpc4drvr.sys version = 1.0.4.0. LPT base address = 0378h.
 Cable Type = 1, Revision = 3.
 Setting cable speed to 5 MHz.
Cable connection established.

  -snip-

JTAG MDM Connected to MicroBlaze 1
Connected to "mb" target. id = 0
Starting GDB server for "mb" target (id = 0) at TCP port no 1234

XMD% dow -data image.bin 0x10200000
 DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.
 DeviceIoControl LPT_WRITE_CMD_BUFFER Failed.

/marco
___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/