Re: [microblaze-uclinux] Microblaze4 slow kernel download with XMD

[Marco Cavallini <arm.linux@xxxxxxxxxxxxxxxx>]

Claudio Lanconelli ha scritto:
> Connecting to cable (Parallel Port - parport0).
> WinDriver v7.01 Jungo (c) 1997 - 2005 Build Date: Aug 10 2005 X86 32bit
> 16:24:42.
> parport0: baseAddress=0x378, ecpAddress=0x778
> LPT base address = 0378h.
> ECP base address = 0778h.
> ECP hardware is detected.
> Cable connection established.
> Connecting to cable (Parallel Port - parport0) in ECP mode.
> WARNING:iMPACT -  Module xpc4drvr is not loaded. Please reinstall the cable
>   drivers. See Answer Record 18612.
> Cable connection failed.
> Connecting to cable (Parallel Port - parport0).
> WinDriver v7.01 Jungo (c) 1997 - 2005 Build Date: Aug 10 2005 X86 32bit
> 16:24:42.
> LPT base address = 0378h.
> ECP base address = 0778h.
> Cable connection established.
> ECP port test failed. Using download cable in compatibility mode.

You could try manually replacing the older Jungo parallel Driver
windrvr6.sys version = 6.2.2.2. instead of the new one
WinDriver v7.01
However I don't trust on both :'(

--
Marco Cavallini
Koan s.a.s. - Bergamo - ITALIA
Embedded and Real-Time Software Engineering
www.koansoftware.com    |    www.klinux.org
___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/