Hi Sigi, Thanks your help. drivers/mtd/maps/mb_auto.c #define BUS_WIDTH 4 was wrongly set to 4. so set to 2 then this problem was solved. (attached bootlog) Regards, Katsumi Muranaka http://muranaka.info/pukiwiki/ On Sun, 16 Apr 2006 21:11:06 +0100 Sigmund Homolya <sigmund.homolya@xxxxxxxxxxxxxxxx> wrote: > Hi Katsumi, > > This issue is often met in the uclinux mailing list already. > in your bootlog line number 33 you can find the > probe(0x0x21000000,8388608,4). > the four has to be changed to a two. > this is done as described in > this thread: > > http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/archive/2006/03/msg00034.html > > if you ca't find it via my link, see the browsable mailinglist mailinglist at > > http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/ > > and browse to > > Re: [microblaze-uclinux] S3MB1500 board AT49BV322 Flash Sigmund Homolya Sun 05 > Mar 2006 - 05:29 am; > > greetings, sigi > > > On Saturday 15 April 2006 18:36, Muranaka, Katsumi wrote: > > Hi, > > > > I got uClinux running on Xilinx Spartan-3E Starter Kit. > > > > Please see the s3e_sk_bootlog.log, s3e_sk_XMD.log > > and auto-config.in attached. > > > > The following message, is there advice? > > "CFI: Found no Flash device at location zero"
Attachment:
s3e_sk_bootlog_b2.log
Description: Binary data