Re: [microblaze-uclinux] Redirect kernel boot messages

["Antti" <antti@xxxxxxxxxxxx>]

----- Original Message ----- 
From: "Felix Mühlbauer" <muehlbauer@xxxxxxxxxxxxxxxxxxxx>
To: <microblaze-uclinux@xxxxxxxxxxxxxx>
Sent: Friday, April 28, 2006 2:50 PM
Subject: Re: [microblaze-uclinux] Redirect kernel boot messages


> Hello,
>
> this was a general question.
> can the console option be "hardcoded" into the image.bin?
>
> @antti:
> btw. how can the bootloader on the hydraxc give options to the kernel?
> especially on the hydraxc-10 were the bootloader can not be altered.

sure the bootloader can be altered on hydraxc-10 too, the only difference
is that in xc-10 the microblaze bootloader receives the image being 
pushed-in
via the jtag-bscan while in all other models the soft-core cpu in FPGA is
reading directly from mini-SD card.

the bootloader for xc-10 is on the CD-ROM that is shipped with the module
it can be of course modified, to provide additional processing after image
load and before image is started

Antti 

___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/