Re: [microblaze-uclinux] Got uClinux login prompt but not the boot log

[Matthieu Simon <mathieu.simon@xxxxxxxxxx>]

Thank you for your fast reply Dries.

I tried with a baudrate about 9600, it gave me exactly the same as 
before (with 115200).

I changed it in XPS (uartlite) and in "/etc/inittab" but what are the 
"..." ? ;)
Seriously, is there anything else to edit to modify the baudrate ?
I don't really understand how it works cause my first try was to 
regenerate the FPGA configuration with uartlite's baudrate at 9600 and 
download my "old" image.bin (configured to 115200) and it still worked 
fine (when I mean "worked", I mean I still got the login prompt without 
boot log).

I believe in that I forgot somethin' in kernel's config but how can I 
revert kernel's config by default without checkin'out the CVS repository ?
(I'm quite new with kernel (linux) compilation, in the past I always 
used precompiled binaries).

Regards,

Matthieu


Dries Schellekens a écrit :
> Matthieu Simon wrote:
>
> > Does anyone have ever experienced this kind of problem ?
> > Why do I got this ?
> > How to fix it ?
>
> I think there is something wrong with the speed of your serial 
> console. If you configure everything to be 9600 baud (uartlite, getty 
> in /etc/inittab, ...), you normally should be safe.
>
>
> Cheers,
>
> Dries
>
> Disclaimer: http://www.kuleuven.be/cwis/email_disclaimer.htm
>
> ___________________________
> microblaze-uclinux mailing list
> microblaze-uclinux@xxxxxxxxxxxxxx
> Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
> Mailing List Archive : 
> http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/
___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/