The system ace controller gets very unhappy if there's not a valid system ace image (xilinx.sys and all the recommended structure) on the CF card - it needs to be more than just an MSDOS partition on there.
Hi John, thank you for answering.Actually I have only image.bin into my CF, I read in DS080.pdf that it should be required, BTW where should I find a xilinx.sys example file ?
Also, find the error string "JTAG controller couldn't read configuration from the CompactFlash" in the adapter.c, then trace it back into the Xilinx level 0/1 drivers - try to work out what situation causes this error - there might be a clue there.
Error is caused by ststus reg XSA_SR_CFGERROR_MASK | XSA_SR_CFCERROR_MASK in XSysAce_InterruptHandler()
TIA -- Marco Cavallini Koan s.a.s. - Bergamo - ITALIA Embedded and Real-Time Software Engineering www.koansoftware.com | www.klinux.org ___________________________ microblaze-uclinux mailing list microblaze-uclinux@xxxxxxxxxxxxxx Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/