Hi,
Perhaps I got
Option in software platform settings Flash
memory should neither be none nor SRAM. It should be instance of Flash memory
itself.
Base System Builder will obviously give u
option for Flash (Nothing like detection of Flash) as eveif
u don’t connect board, it creates hardware & software ptatforms contains Flash mappings (mapping for every peripherals).
Look in mhs or mss file whether Flash has entry or
not. That will help u about ur confusion of not detection
of flash.
Regards,
Sweta
Bhatt
Embedded Engineer |
eInfochips.
contact - sweta.bhatt@xxxxxxxxxxxxxx |
+919898833805
-----Original Message-----
From:
owner-microblaze-uclinux@xxxxxxxxxxxxxx
[mailto:owner-microblaze-uclinux@xxxxxxxxxxxxxx] On Behalf Of Kunal Kishore
Sent: Friday, May 26, 2006 10:19
AM
To:
microblaze-uclinux@xxxxxxxxxxxxxx
Subject: [microblaze-uclinux]
Regarding bootloader error
Hi Sweta,
In your reply you have mentioned about enabling auto
convert.How to do it.One more problem is that image file is loaded into SRAM
and not in flash as while building the project it doesn't detect any flash in
the board.Changing the flash option in"software platform settings"
from "none" to SRAM with same start address will do ? So I tend
to agree more with your second answer that there is some problem with the
board.Do you think I should go for some other board like the one from
Nu-Horizon where the flash is supported by the base builder system.
Waiting for your reply.
Regards,
Kunal Kishore