[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [microblaze-uclinux] uClinux booting but no bootlog on the Tera Term
Kunal Kishore <kunalpatna@xxxxxxxxx> wrote:
> Hi all,
> After porting successfully I have come across following problems.
>
>
> 1. The Login prompt appears on the Tera Term(57600-8-N-1-N) but
> bootlog doesnt appear at all. Is this a serious problem or can be
> overlooked.
Have you enabled console and debug logging to the UART?
"Processor type and features" -> "Console on UARTLITE"
-> "Enable debug logging"
> 2. When shell is "minix-shell" the login prompt is "uclinux-auto
> login:" which can be logged in using "root". But when I tried changing the
> shell to "bash" the login prompt was "<none> login:" which could not be
> logged in at all.Tried all the combinations.
> 3. Till now I am only able to boot from SDRAM (8 MB). But I want to
> boot from flash (4 MB). Kindly provide me some help on this topic in
> particular. Will I have to write my own bootloader. The board I am using
> is
> spartan 3 400 development board and EDK 7.1. I went through the early
> archives but they were about memec board. If I try using XMD to download
> (dow -data image.bin flashaddress) the contents of the flash dont
> change. Can I use "Program Flash Memory" utilty of the EDK ? Can the
> "flashtools" by John in previous archive be used ? HELP !!!
>
> Looking forward to your help.
>
> Regards,
> Kunal Kishore.
--
Dr. Johann Pfefferl ------------ mailto j.pfefferl at eubus dot net
Eubus GmbH http://www.eubus.net +++++ http://www.hydraxc.com
Phone: +49 (0)89 45 22 578-67
Fax: +49 (0)89 45 22 578-55
==
-o) A computer program does what you tell it to do,
/\\ not what you want it to do.
_\_v-
___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/