Hello,
I managed to bootup linux but i cannot login with root/uClinux
I think this is because the creation of flash failed. I checked
my menuconfig twice - it matches that one from the tutorial by John Williams.
Thanks, Philipp
Creating 8 MTD partitions on "Flash":
0x00000000-0x00004000 : "Bootloader"
mtd: partition "Bootloader" doesn't end on an erase block -- force read-only
0x00004000-0x00008000 : "Bootargs"
mtd: partition "Bootargs" doesn't start on an erase block boundary -- force read
-only
0x00008000-0x0000c000 : "MAC"
mtd: partition "MAC" doesn't start on an erase block boundary -- force read-only
0x00010000-0x00020000
mtd: partition "Config" doesn't start on an erase block boundary -- force read-o
nly
0x0000c000-0x00010000 : "Spare"
mtd: partition "Spare" doesn't start on an erase block boundary -- force read-on
ly
0x00100000-0x00400000 : "Image"
0x00400000-0x00800000 : "JFFS2"
0x00000000-0x00800000 : "Flash"
MicroBlaze auto-config ram probe(0x240e6904,864256,4): d3000 at 240e6904
Creating 1 MTD partitions on "RAM":
0x00000000-0x000d3000 : "Romfs"
VFS: Mounted root (romfs filesystem) readonly.
Freeing init memory: 40K
Mounting
Mounting var:
Populating /var:
Running local start scripts.
Mounting /etc/config:
Populating /etc/config:
flatfsd: Nonexistent or bad flatfs (-114), creating new one...
/bin/flatfsd: mtd.c: 156: flat_dev_close: Assertion `flatinfo.fd != -1' failed.
flatfsd: mtd.c: 156: flat_dev_close: Assertion `flatinfo.fd != -1' failed.
Abort