Re: [microblaze-uclinux] SAMBA problem

["Jose Torres" <vonneh@xxxxxxxxx>]

Dear Cedric,
I finally have some time to mess around with SAMBA and I was wondering if you had any further luck.
Tried compiling it myself but I also ran into the problem with "host".

checking host system type... Invalid configuration `microblaze-uclinux': machine `microblaze' not recognized
configure: error: /bin/sh ../config.sub microblaze-uclinux failed

I also noticed this warning:
configure: WARNING: If you wanted to set the --build type, don't use --host.
    If a cross compiler is detected then cross compile mode will be used.
SAMBA VERSION: 3.0.13

Looking in ...\petalinux-dist\user\samba and ...\petalinux-dist\user\samba\source
I could not find where you modified those symbols.

Can anyone provide further assistance.

Thanks,
Jose Torres

On 1/26/07, Cedric LORANT <cedric.lorant@xxxxxxxxxxx> wrote:

Hello Jose,

The idea is to be able to access some data in the target application.
SAMBA allows me to get these informations directly as files from Windows
Desktop computer.

If you want I can give you a 'smb.conf' file for playing with.

Greetings,

Cedric.


-----Original Message-----
From: owner-microblaze-uclinux@xxxxxxxxxxxxxx
[mailto:owner-microblaze-uclinux@xxxxxxxxxxxxxx ]On Behalf Of Jose Torres
Sent: 26 January 2007 05:53
To: microblaze-uclinux@xxxxxxxxxxxxxx
Subject: Re: [microblaze-uclinux] SAMBA problem

Hi,
I haven't attempted to use Samba for my petalinux installation. Could
you explain the applications of using samba for petalinux? I might try
to install this myself.
Thanks.

On 1/25/07, cedric.lorant@xxxxxxxxxxx < cedric.lorant@xxxxxxxxxxx> wrote:
> Dear uClinux experts,
>
> I am experiencing some problems to make samba running properly under
> uClinux...
> My question has multiple aspects, I hope somebody can help me !!!
>
> Here is a short view of the situation:
>
> I am using uClinux from the latest uClinux CVS repository. But I also
> tried with several older versions (all are related to SAMBA 3.0.13 -
> there is some minor changes in the makefile)
>
> First, I had several problems compiling correctly SAMBA.
> I had to do 2 little modifications to the generated makefile
> - modify makefile to "host=i686"
> - modify makefile to "without-smbmount"
>
> Modification about host is OK(read 'understandable by me'). But why
> couldn't I compile with default option "with-smbmount" is still a mystery:
> If I keep this default option, I get an error message telling me that my
> system is not running Linux (or something near that meaning)....
>
> After these 2 mods, SAMBA compiles correctly...but...
>
> I could not run SAMBA fully correctly. If I try to launch SAMBA
> "smbd -D &" and "nmbd -D & ", they do not become deamons. Their PID
> immediately disappears in the process list.
>
> My smb.conf can be considered as ok. I am not completely new to SAMBA
> configuration, and ...
>
> If I launch "nmbd -i -S -d 2" It runs more or less properly.
> Same for "smbd -i -S -d 2". It runs but, sometimes exits (and say 'exit
> properly'). Then I have to run it again and it still continue to
operate...
> Then I know that my smb.conf is ok, because in that case, I can fully
> navigate and find uClinux with IP or NETBIOS name, copy, read and erase
> files.
>
> My question is "Why it doesn't want to run properly as a daemon"...(or
> how to make it run properly as a daemon?)
>
> If I look at the log file, log stops after saying: "becoming a daemon"
>
> I also tried to start them using inetd. But no success. When I try to
> connect, I got messages 'execv!' full on my console...
>
> I also tried the SAMBA version in the Petalogic distribution, but I get
> the same makefile compilation errors. (Even worst: stops compiling at
> libsmb:clifile ).
>
> Does anybody have an idea in which direction I must look for???
>
> Thanks in advance,
>
> Greetings,
>
> Cedric.
> ___________________________
> microblaze-uclinux mailing list
> microblaze-uclinux@xxxxxxxxxxxxxx
> Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
> Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/