[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [microblaze-uclinux] SAMBA problem

Hi Jose,
Different mail clients render attached patch files in different ways - mozilla for example shows it both inline at the end, and as an attachment.
Strange to me that the patch didn't apply to a clean petalinux install, but as you say it is a simple one to apply manually.
Glad it built for you - should run OK. I have gone and audited the config.sub files for all auto-configured packages in petalinux and made sure microblaze is a valid target. 

Thanks,

John

Jose Torres wrote:
Please disregard my previous email. I didn't notice the patch was actually truncated by gmail at the end of your email. I tried applying the patch but 2 out of 2 hunks failed. Instead I made the two changes manually in the config.sub file and was able to successfully compile samba. I have one other hurdle to pass before I can test it but it looks like it'll work. 
Thanks a lot!
- Jose Torres

On 3/6/07, *Jose Torres* <vonneh@xxxxxxxxx <mailto:vonneh@xxxxxxxxx>> wrote:

    Hi John,
    I am sorry but I am not sure where to locate the patch.
    Did you attach it to the email? If so, it did not come through.
    Thanks for your prompt response.
    - Jose

    On 3/6/07, *John Williams* <jwilliams@xxxxxxxxxxxxxx
    <mailto:jwilliams@xxxxxxxxxxxxxx>> wrote:

        Hello Jose, Cedris,

        Can you please try the attached patch?  Apply from the toplevel
        petalinux directory:

        [user@petalinux]$ patch -p0 < petalinux-samba.patch

        Then rebuild in the normal petalinux user build process.

        I tested it here and it configures and builds OK - I haven't had an
        opportunity to boot/run test it yet.

        Please let me know if this works for you, and I'll roll the
        patch into
        the next release.

        Thanks,

        John

        P.S. To apply to a regular uClinux-dist (if not using
        PetaLinux), go to
        uClinux-dist directory and

        [user@uClinux-dist]$ patch -p2 < petalinux-samba.patch

        Jose Torres wrote:

 Dear Cedric,
 I finally have some time to mess around with SAMBA and I was

        wondering

 if you had any further luck.
 Tried compiling it myself but I also ran into the problem with

        "host".


 checking host system type... Invalid configuration

        `microblaze-uclinux':

 machine `microblaze' not recognized
 configure: error: /bin/sh ../config.sub microblaze-uclinux failed

 I also noticed this warning:
 configure: WARNING: If you wanted to set the --build type,

        don't use --host.

    If a cross compiler is detected then cross compile mode

        will be used.

 SAMBA VERSION: 3.0.13

 Looking in ...\petalinux-dist\user\samba and
 ...\petalinux-dist\user\samba\source
 I could not find where you modified those symbols.

 Can anyone provide further assistance.

 Thanks,
 Jose Torres



 On 1/26/07, *Cedric LORANT* < cedric.lorant@xxxxxxxxxxx

        <mailto:cedric.lorant@xxxxxxxxxxx>

 <mailto: cedric.lorant@xxxxxxxxxxx

        <mailto:cedric.lorant@xxxxxxxxxxx>>> wrote:


    Hello Jose,

    The idea is to be able to access some data in the target

        application.

    SAMBA allows me to get these informations directly as files

        from Windows

    Desktop computer.

    If you want I can give you a 'smb.conf' file for playing with.

    Greetings,

    Cedric.


    -----Original Message-----
    From: owner-microblaze-uclinux@xxxxxxxxxxxxxx

        <mailto:owner-microblaze-uclinux@xxxxxxxxxxxxxx>

    <mailto: owner-microblaze-uclinux@xxxxxxxxxxxxxx

        <mailto:owner-microblaze-uclinux@xxxxxxxxxxxxxx>>

    [mailto:owner-microblaze-uclinux@xxxxxxxxxxxxxx

        <mailto:owner-microblaze-uclinux@xxxxxxxxxxxxxx>

    <mailto: owner-microblaze-uclinux@xxxxxxxxxxxxxx

        <mailto:owner-microblaze-uclinux@xxxxxxxxxxxxxx>> ]On Behalf Of Jose

    Torres
    Sent: 26 January 2007 05:53
    To: microblaze-uclinux@xxxxxxxxxxxxxx

        <mailto:microblaze-uclinux@xxxxxxxxxxxxxx>

    <mailto: microblaze-uclinux@xxxxxxxxxxxxxx

        <mailto:microblaze-uclinux@xxxxxxxxxxxxxx>>

    Subject: Re: [microblaze-uclinux] SAMBA problem

    Hi,
    I haven't attempted to use Samba for my petalinux

        installation. Could

    you explain the applications of using samba for petalinux?

        I might try

    to install this myself.
    Thanks.

    On 1/25/07, cedric.lorant@xxxxxxxxxxx

        <mailto:cedric.lorant@xxxxxxxxxxx>

    <mailto: cedric.lorant@xxxxxxxxxxx

        <mailto:cedric.lorant@xxxxxxxxxxx>> < cedric.lorant@xxxxxxxxxxx
        <mailto:cedric.lorant@xxxxxxxxxxx>

    <mailto: cedric.lorant@xxxxxxxxxxx

        <mailto:cedric.lorant@xxxxxxxxxxx>>> wrote:

     > Dear uClinux experts,
     >
     > I am experiencing some problems to make samba running

        properly under

     > uClinux...
     > My question has multiple aspects, I hope somebody can

        help me !!!

     >
     > Here is a short view of the situation:
     >
     > I am using uClinux from the latest uClinux CVS

        repository. But I also

     > tried with several older versions (all are related to

        SAMBA 3.0.13 -

     > there is some minor changes in the makefile)
     >
     > First, I had several problems compiling correctly SAMBA.
     > I had to do 2 little modifications to the generated

        makefile

     > - modify makefile to "host=i686"
     > - modify makefile to "without-smbmount"
     >
     > Modification about host is OK(read 'understandable by

        me'). But why

     > couldn't I compile with default option "with-smbmount"

        is still a

    mystery:
     > If I keep this default option, I get an error message

        telling me

    that my
     > system is not running Linux (or something near that

        meaning)....

     >
     > After these 2 mods, SAMBA compiles correctly...but...
     >
     > I could not run SAMBA fully correctly. If I try to

        launch SAMBA

     > "smbd -D &" and "nmbd -D & ", they do not become

        deamons. Their PID

     > immediately disappears in the process list.
     >
     > My smb.conf can be considered as ok. I am not completely

        new to SAMBA

     > configuration, and ...
     >
     > If I launch "nmbd -i -S -d 2" It runs more or less properly.
     > Same for "smbd -i -S -d 2". It runs but, sometimes exits

        (and say

    'exit
     > properly'). Then I have to run it again and it still

        continue to

    operate...
     > Then I know that my smb.conf is ok, because in that

        case, I can fully

     > navigate and find uClinux with IP or NETBIOS name, copy,

        read and

    erase
     > files.
     >
     > My question is "Why it doesn't want to run properly as a
    daemon"...(or
     > how to make it run properly as a daemon?)
     >
     > If I look at the log file, log stops after saying:

        "becoming a

    daemon"
     >
     > I also tried to start them using inetd. But no success.

        When I try to

     > connect, I got messages 'execv!' full on my console...
     >
     > I also tried the SAMBA version in the Petalogic

        distribution, but

    I get
     > the same makefile compilation errors. (Even worst: stops

        compiling at

     > libsmb:clifile ).
     >
     > Does anybody have an idea in which direction I must look

        for???

     >
     > Thanks in advance,
     >
     > Greetings,
     >
     > Cedric.
     > ___________________________
     > microblaze-uclinux mailing list
     > microblaze-uclinux@xxxxxxxxxxxxxx

        <mailto:microblaze-uclinux@xxxxxxxxxxxxxx>

    <mailto: microblaze-uclinux@xxxxxxxxxxxxxx

        <mailto:microblaze-uclinux@xxxxxxxxxxxxxx>>

     > Project Home Page :
    http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux

        <http://www.itee.uq.edu.au/%7Ejwilliams/mblaze-uclinux>

     > Mailing List Archive :
    http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/

        <http://www.itee.uq.edu.au/%7Elistarch/microblaze-uclinux/>





        Index: software/petalinux-dist/user/samba/source/config.sub
        ===================================================================
        ---
        software/petalinux-dist/user/samba/source/config.sub        (revision
        2389)
        +++
        software/petalinux-dist/user/samba/source/config.sub        (working
        copy)
        @@ -238,6 +238,7 @@
                | i370 | i860 | i960 | ia64 \
                | ip2k | iq2000 \
                | m32r | m32rle | m68000 | m68k | m88k | mcore \
        +       | mb | microblaze \
                | mips | mipsbe | mipseb | mipsel | mipsle \
                | mips16 \
                | mips64 | mips64el \
        @@ -311,6 +312,7 @@
                | m32r-* | m32rle-* \
                | m68000-* | m680[012346]0-* | m68360-* | m683?2-* |
        m68k-* \
                | m88110-* | m88k-* | mcore-* \
        +       | mb-* | microblaze-* \
                | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
                | mips16-* \
                | mips64-* | mips64el-* \




--
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Jose A. Torres
Treasurer
Multi Disciplinary Robotics Club
Multi Agent Bio-Robotics Lab (09-1100)
Kate Gleason College of Engineering
Rochester Institute of Technology

http://mdrc.rit.edu
http://gameboysandrobots.com

Email: jat5737@xxxxxxx <mailto:jat5737@xxxxxxx>
Cellphone:(585) 230-5709
Lab phone:(585) 475-7208
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/