[microblaze-uclinux] MicroBlaze --- uclinux

[Ashish Darbari <ashish@xxxxxxxxxxxxxxx>]

Hi,

I'm having trouble synthesizing the uclinux distribution for Microblaze
(http://www.digilentinc.com/Data/Products/XUPV2P/uclinux-xupv2p_rev_1_1.zip) 
using EDK and ISE.
Have tried using both EDK7.1 with SP4 and ISE 7.1 SP3, and with EDK 8.1 
on a  Digilent XUP Virtex II
Pro Board. I get a warning and then an error complaining  about missing 
license.

Any help is appreciated.

Ashish

Here is a log of what I get:
----------------------------

Check platform configuration ...
WARNING:MDT - opb_ethernet (ethernet_mac) - L:\Documents and
Settings\ad06v\Desktop\uclinux-xupv2p_rev_1_1\system.mhs:170 - This design
requires design constraints to guarantee performance.
Please refer to the opb_ethernet_v1_02_a data sheet for details.
The OPB Bus clock frequency must be greater than or equal to 65 MHz for 100
Mbs Ethernet operation and greater than or equal to 6.5 MHz for 10 Mbs
Ethernet operation.
INFO:coreutil - Valid license for feature opb_ethernet_v1 not found.
You may use the customization GUI for this core but you will
not be able to generate any implementation or simulation files.
Contact Xilinx to obtain a full license for this LogiCORE. For more
information please refer to www.xilinx.com/ipcenter/ipevaluation/
FLEXlm Error: No such feature exists (-5,21)

ERROR:MDT - opb_ethernet (ethernet_mac) - L:\Documents and
Settings\ad06v\Desktop\uclinux-xupv2p_rev_1_1\system.mhs:170 - invalid
license or no license found!


___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/