Xilinx Microprocessor Debug (XMD) Engine Xilinx EDK 8.2.02 Build EDK_Im_Sp2.4 Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved. XMD% Loading XMP File.. Processor(s) in System :: Microblaze(1) : microblaze_0 Address Map for Processor microblaze_0 (0x00000000-0x00001fff) dlmb_cntlr dlmb (0x00000000-0x00001fff) ilmb_cntlr ilmb (0x24000000-0x27ffffff) DDR_SDRAM_64Mx32 mb_opb (0x24000000-0x27ffffff) DDR_SDRAM_64Mx32 ixcl (0x24000000-0x27ffffff) DDR_SDRAM_64Mx32 dxcl (0x40000000-0x4000ffff) LEDs_4Bit mb_opb (0x40600000-0x4060ffff) RS232_Uart mb_opb (0x40c00000-0x40c0ffff) Ethernet_MAC mb_opb (0x41200000-0x4120ffff) opb_intc_0 mb_opb (0x41c00000-0x41c0ffff) opb_timer_1 mb_opb Connecting to cable (Parallel Port - LPT1). Checking cable driver. Driver windrvr6.sys version = 7.0.0.0. LPT base address = 0378h. ECP base address = 0778h. Cable connection failed. Connecting to cable (Parallel Port - LPT1). Checking cable driver. Driver windrvr6.sys version = 7.0.0.0. LPT base address = 0378h. ECP base address = 0778h. Cable connection failed. Connecting to cable (Parallel Port - LPT2). Checking cable driver. Driver windrvr6.sys version = 7.0.0.0.Cable connection failed. Connecting to cable (Parallel Port - LPT2). Checking cable driver. Driver windrvr6.sys version = 7.0.0.0.Cable connection failed. Connecting to cable (Usb Port - USB22). Checking cable driver. Driver xusbdfwu.sys version: 1021 (1021). Driver windrvr6.sys version = 7.0.0.0.Calling setinterface num=0, alternate=0. DeviceAttach: received and accepted attach for: vendor id 0x3fd, product id 0x8, device handle 0x1672648 Cable PID = 0008. Max current requested during enumeration is 280 mA. Cable Type = 3, Revision = 0. Setting cable speed to 6 MHz. Cable connection established. Firmware version = 1021. CPLD file version = 0012h. CPLD version = 0012h. JTAG chain configuration -------------------------------------------------- Device ID Code IR Length Part Name 1 0a001093 8 System_ACE 2 05059093 16 XCF32P 3 01e58093 10 XC4VFX12 4 09608093 8 xc95144xl Assuming, Device No: 3 contains the MicroBlaze system Connected to the JTAG MicroProcessor Debug Module (MDM) No of processors = 1 MicroBlaze Processor 1 Configuration : ------------------------------------- Version............................5.00.c No of PC Breakpoints...............2 No of Read Addr/Data Watchpoints...0 No of Write Addr/Data Watchpoints..0 Instruction Cache Support..........on Instruction Cache Base Address.....0x24000000 Instruction Cache High Address.....0x27ffffff Data Cache Support.................on Data Cache Base Address............0x24000000 Data Cache High Address............0x27ffffff Exceptions Support................off FPU Support.......................off FSL DCache Support.................on FSL ICache Support.................on Hard Divider Support...............on Hard Multiplier Support............on Barrel Shifter Support.............on MSR clr/set Instruction Support....on Compare Instruction Support........on Number of FSL ports..............1 PVR Supported......................off MBsfsl(0)-MDMmfsl(0) Connected..........Yes JTAG MDM Connected to MicroBlaze 1 Connected to "mb" target. id = 0 Starting GDB server for "mb" target (id = 0) at TCP port no 1234 XMD% dow -data image.bin 0x24000000 XMD% con 0x24000000 Processor started. Type "stop" to stop processor RUNNING> XMD% ERROR:MDT - MicroBlaze Pipeline Stalled executing Instruction at >> PC: 0x00000010 Try Resetting the Processor to Continue.. XMD%
Attachment:
auto-config.in
Description: Binary data