[microblaze-uclinux]RE: nfs problems

["Larry Rystrom" <Rystrom@xxxxxxxxxxxxxxxxxxxxxx>]

Thanks, turning on Portmap made it work.

Larry 

-----Original Message-----
From: owner-microblaze-uclinux@xxxxxxxxxxxxxx
[mailto:owner-microblaze-uclinux@xxxxxxxxxxxxxx] On Behalf Of John
Williams
Sent: Friday, March 30, 2007 5:59 PM
To: microblaze-uclinux@xxxxxxxxxxxxxx
Subject: Re: [microblaze-uclinux]nfs problems

Hi LArry,

Larry Rystrom wrote:

> Thank you for your continued patience. I have been making very good
progress including burning uClinux into flash memory and booting from
it. The next step seems to be mounting a directory via nfs to allow file
sharing. When I try a mount in uClinux I get a long delay (about 5
minutes) before getting time out error messages.

Glad to hear you are making progress.

The NFS one should be simple - you need to build and run the "portmap"
application.

You can select it from menu config -> user/vendor settings -> network
applications.

Selecting it will also cause it to be automatically run on startup, if
you are using default PetaLinux vendor settings.

Rebuild (no clean necessary, just a "make user_only romfs image") and
you'll be good to go.

Regards,

John

___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive :
http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/


___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/