[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[microblaze-uclinux] Spartan3E board and u-boot question



Hi everyone,

Now, i'm able to build the hardware and compile for the Spartan3e-500 board.

I send the bit fit to the board,
see the FS-BOOT,
send the u-boot.srec file and see the running cursor

The following messages appear:

FS-BOOT: Warning image location differ from default boot location.
Image will not boot automatically after POR.

FS-BOOT: Press 'n' to boot old image.

FS-BOOT: Use new image.

FS-BOOT: Booting image...


I'm trying to figure the problem, is it the SDRAM, the u-boot
configuration problem?

The variable CONFIG_XILINK_ERAM_START is 0x22000000

And here are the two first lines of the u-boot.srec:

S00E0000752D626F6F742E73726563C0
S31523FC00009400C001B00023F6202000002021FFFC31

Does anyone had the same problem or an idea?

Thank you,

Stephane Rousseau
___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/