[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [microblaze-uclinux] Help with fs-boot
Hi friends, I'm trying download image for spartan 3e revD but the
problem is the following:
When I type cat /tftpboot/u-boot.srec > /dev/ttyS0 the following appear
in the kermit terminal, I don't know what happen, How much time I wait?
FS-BOOT First Stage Bootloader (c) 2006 PetaLogix
FS-BOOT: System initialisation completed.
FS-BOOT: No existing image in FLASH. Starting image download.
FS-BOOT: Waiting for SREC image....
FS-BOOT: Image download successful.
FS-BOOT: Warning image location differ from default boot location. Image
will not boot automatically after POR.
FS-BOOT: Press 'n' to boot old image.
FS-BOOT: Use new image.
FS-BOOT: Booting image...
And I wait for ten minutes and nothing happen, please help
Change the mode jumpers to 0:1:0,it should help.
If you write your own software, remember that the REV-D has 64 MBytes of
DRAM, not only 32 MBytes like the REV-C.
microblaze-uclinux mailing list
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/